How to Remove the Rear Seats of an Older CRV?

How much is 5 degrees on the subject three steering wheel?

Taking the center of the steering wheel as the center of the circle and the radiation angle of the steering wheel as the angle, you can check the size of the steering wheel deviation angle. Generally, a deviation of more than 1.5 degrees will cause a delay in the car's steering, and turning 5 degrees is roughly one-tenth of the steering wheel rotation. There are three common faults of the steering wheel, as follows: 1. Steering wheel lock: It means the steering wheel cannot be turned. After the car is turned off, the steering wheel automatically locks due to the anti-theft function. After the car is started, the steering wheel can be automatically unlocked. 2. Steering wheel scratches: This kind of fault can be repaired by going to a professional car repair shop for car maintenance. 3. Steering wheel shaking: Generally, steering wheel shaking occurs at a speed of 80 kilometers to 90 kilometers per hour, and it can return to normal when exceeding 90 kilometers. The use of the steering wheel is very simple. The car needs to turn the steering wheel to whichever side it needs to go. When using the steering wheel, you need to hold the steering wheel with both hands and cannot operate it with one hand.

16

1

Share

Why Do Car Wheel Hubs Rust?

When a car is exposed to humid environments for extended periods, or if the wheel hub surface suffers scratches and other damages, or when cleaning agents containing acids or alkalis are used, the wheel hub may corrode and rust. Here are some relevant explanations: 1. Rust spots: If the rust is not severe, you can first use very fine water sandpaper dipped in water to gently sand away the rust spots, then thoroughly clean the area and apply a layer of primer. This can ensure the rust does not spread or worsen. For new scratches, you can clean the area and directly apply primer. Most vehicles come with a small can of original paint. Although this treatment may not look great, it is acceptable for very small areas. 2. Wheel hub repair: If there are scratches on the wheel hub surface but no rust has appeared yet, it is advisable to perform wheel hub repair. This prevents the wheel hub from rusting and corroding when exposed to cleaning agents.

16

4

Share

What Does the Exclamation Mark Light Mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and windshield wiper fault indicator light. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a brake system fault or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses below and an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check yourself by focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential hazards. Red indicates a very serious problem in the corresponding system. If this occurs, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of potential hazards.

2

Share

Is Standing Guard Required for Subject 3?

Currently, before scheduling Subject 3, it is mandatory to make an appointment for standing guard at the local traffic police department. Without standing guard, you cannot proceed with the Subject 3 appointment. However, exceptions apply to special cases such as pregnant women, individuals with disabilities, men aged 60 or above, women aged 55 or above, and nursing mothers. These individuals can apply for exemption from the standing guard activity and instead participate in centralized viewing of warning education films and other warning education activities. The following are the precautions for the driving test standing guard: 1. Standing Guard Requirements: Before taking the driver's test, candidates must participate in at least 2 hours of traffic violation counseling, with a total standing guard duration of 4 hours required to schedule the test. During standing guard, candidates should correct and stop traffic violations by pedestrians and non-motorized vehicles, guiding the public to comply with traffic laws and consciously develop safe and civilized traffic habits. 2. Standing Guard Regulations: Candidates can independently choose the road section and time for standing guard. During the scheduled time, they must present their valid ID card to report for duty. Upon arrival, they should actively show the successful appointment QR code to the police officer to check in and receive duty equipment. At the end of the duty, they should request to check out and return the equipment to the police officer. Being late will be considered as absenteeism, and no check-in will be allowed, requiring a new appointment.

5

2

Share

What to Do When the Camry's Brakes Fail?

There are many reasons why brakes may fail, such as operational errors, vehicle overload, or damage to the braking system. Below are specific explanations: 1. Regular Brake System Inspection: During vehicle use, most issues arise from the driver's operational mistakes, leading to problems with the car's braking system. Therefore, it's essential to develop good driving habits and regularly inspect the vehicle's braking system. The braking system is crucial for the car, and any issues should not be taken lightly. If problems are detected, promptly visit a repair shop or a 4S store for inspection. 2. Forced Deceleration: While driving, you might find the brakes hard to press, often due to vehicle overload. This situation can easily increase the engine's load and ultimately affect the braking system's normal operation. If the brakes fail while driving, turn on the hazard lights, find a safe section of the road to slow down, and inspect the car once it's safely stopped. In case of brake failure, try to find some buffer objects for forced deceleration, although this may cause damage to the vehicle.

20

3

Share

What is Jiangqi Group?

Jiangqi's predecessor was the Hefei Jianghuai Automobile Factory established in 1964. It is a comprehensive automotive enterprise group that integrates the research, production, and sales of a full range of commercial vehicles, passenger vehicles, and powertrains. It focuses on "advanced energy-saving vehicles, new energy vehicles, and intelligent connected vehicles" and covers numerous fields such as automotive travel and financial services. Since 2009, Jianghuai Automobile has had 10 self-developed engines awarded the "China Heart" Top 10 Engines. More details are as follows: 1. Heavy, medium, light, and mini trucks, multi-purpose commercial vehicles, MPVs, SUVs, sedans, buses, special chassis, and core components such as transmissions, engines, and axles. 2. Full range of models: Sehol New Energy; Refine series; Sehol fuel vehicles; Starry series; Pickup series; Dewos series; Shuailing series; Junling series; Kangling series; Kaida series.

17

0

Share

How to Remove the Rear Seats of an Older CRV?

How much is 5 degrees on the subject three steering wheel?

Why Do Car Wheel Hubs Rust?

What Does the Exclamation Mark Light Mean?

Is Standing Guard Required for Subject 3?

What to Do When the Camry's Brakes Fail?

What is Jiangqi Group?

What Causes Black Exhaust Pipes?

What does 10w-40 mean for engine oil?

Should You Engage the Handbrake When Parking on Rainy Days?

What causes high water temperature and lack of power in trucks?