How to Remove the Rear Seats of an Accord?

2 Answers
AthenaDella
07/24/25 10:45am
Method to remove the rear seats of an Accord: There are two clips under the seat cushion. Slowly lift from one side of the rear seat until you can reach in with your hand. However, it is not easy to remove because the clips inside are made of steel wire. You need to firmly pinch them towards the center with your hand, but be careful as they can break easily. Once done, you can remove the rear seats of the Accord. The Accord is a mid-size car launched by GAC Honda. The dimensions of this car are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. The car's exterior adopts a brand-new design, making the overall shape appear lower. The fastback design further highlights the sporty temperament of the car. From the side view, the car features a three-dimensional waistline that extends from the front face to the rear, visually elongating the body of the car.
Was this review help?
10
2
Share
DelBradley
08/11/25 5:48am
Removing the rear seats of an Accord isn’t actually difficult—I’ve done it several times. First, climb into the back seat, kneel in front of it, and look down at the bottom front of the seat. There’s usually a black pull strap or loop there, which is easy to spot. Grab it firmly with your hand and pull upward—you’ll feel the latch release, unlocking the seat base. Then, pull the entire front part of the seat forward, and it can be lifted or detached. Next, you’ll need to handle the backrest. The backrest typically has securing hooks or screws located on the inner wall of the trunk. Open the trunk, crawl in, and locate the hooks or screws, carefully unlocking or unscrewing them. During the process, avoid using excessive force to prevent damaging plastic components. This procedure is useful for tasks like cleaning debris under the seats or installing child seats. Remember to turn off the engine beforehand, and using a flashlight can help illuminate details. When reassembling, press firmly to ensure the latches lock securely, preventing any rattling while driving. This is my personal experience sharing.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What car has a GT on the steering wheel?

Steering wheel with GT is from BMW. Introduction to steering wheel: A wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Function of steering wheel: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft. Using a larger diameter steering wheel reduces the hand force required from the driver during steering. The steering intermediate shaft serves as a connecting component between the steering gear and steering shaft, facilitating the standardization of steering gears, compensating for manufacturing and installation errors, and enabling more rational installation of the steering gear and steering wheel in the vehicle.
20
5
Share

Does Fender Reshaping Count as an Accident Vehicle?

Fender reshaping does not count as an accident vehicle. Concept of Fender: The fender, also known as the wing panel, is divided into front fender and rear fender based on its installation position. It is a type of covering component on motor vehicles and non-motor vehicles. Function of Fender: According to fluid dynamics, it reduces the drag coefficient, making the vehicle run more smoothly. The front fender prevents sand, gravel, and mud splashed up by the wheels during driving from reaching the bottom of the cabin, thereby reducing damage and corrosion to the chassis. Definition of Accident Vehicle: An accident vehicle refers to a vehicle that has suffered damage due to non-natural wear accidents, resulting in a decline in mechanical performance and economic value. First, observe whether the gaps between the vehicle's covering parts are uniform and consistent, and then check if the side body lines are smooth. If the waistline is noticeably uncoordinated, it can be concluded that the vehicle has been involved in a collision, and a relatively severe one at that.
18
1
Share

What time does the license plate auction start?

The license plate auction time is generally from 9:00 to 16:00 during the 7 days before the third Saturday of each month. License plate application process: The applicant submits the auction participation application online in person, which is accepted and verified by the Transportation Administrative Service Center; Wait for verification results (20 working days); Schedule an appointment at a service point to complete auction registration procedures; Receive the "Auction Sealed Code Slip"; After approval, the "Auction Sealed Code Slip" will be automatically activated, allowing participation in the current auction. Precautions for license plate auction: If the quota certificate exceeds its validity period, the holder cannot use it to complete vehicle registration procedures. The holder may entrust a qualified auction institution to auction the passenger car quota within 2 years after the expiration; If the holder still does not entrust the auction within the aforementioned period, they will no longer have the right to entrust the auction, except for legal reasons preventing the exercise of this right. The holder cannot apply to participate in passenger car quota auctions again within 3 years after entrusting the auction. Shanghai new energy vehicle indicators can be directly applied for and obtained for free without participating in auctions.
15
5
Share

Can I Buy a Used Car from Another Region?

It is possible to purchase a used car from another region. Steps for purchasing: Upon arriving at the transfer hall, present the required documents to obtain a "Cross-Region (Local) Used Vehicle Sales Contract." Both parties should fill in their respective details. Once completed, submit all the documents to proceed with the "Transfer Acceptance" process. Next, drive the vehicle to the inspection area, where staff will conduct an inspection, take imprints of the vehicle identification number, remove the license plate, and take photos. A fee of 35 yuan is required for the imprinting service. Collect the vehicle photos and attach them to the inspection record form. Principle of vehicle transfer: Every vehicle has a fixed registration record, which primarily includes the owner's name, address, and relevant vehicle parameters. Transferring a vehicle certifies that it belongs to the new owner and has no involvement in accidents or violations. If the vehicle has issues—such as being involved in an accident, failing annual inspections, being stolen, or being smuggled—it cannot undergo the normal transfer process.
13
0
Share

How to Replace the Transmission Fluid for Buick LaCrosse?

Buick LaCrosse transmission fluid replacement can be divided into two steps: 1. Remove the transmission oil pan, take out the filter, and clean the oil pan thoroughly. 2. Then install a new filter and reassemble the oil pan, followed by adding new transmission fluid. Depending on the transmission structure, transmission fluid is categorized into manual transmission fluid and automatic transmission fluid. Below are the relevant details: 1. Manual transmission fluid, commonly referred to as gear oil. It is primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents to form an essential lubricant. Used in various gear transmission devices to prevent gear surface wear, scuffing, sintering, etc., thereby extending service life, improving power transmission efficiency, and reducing power loss. 2. Automatic Transmission Fluid (ATF) is specifically designed for automatic transmissions. The dedicated fluid used serves as the hydraulic fluid for the torque converter, the lubricating oil for the planetary gear structure, and the hydraulic oil for the shifting mechanism. Under normal driving conditions, ATF should be replaced every 120,000 kilometers, while under severe driving conditions, it should be replaced every 60,000 kilometers.
10
4
Share

What is the fuel consumption of the Geely New Vision?

Geely New Vision has good fuel consumption performance, with the MIIT comprehensive fuel consumption being only 6.3L/100km. The 2017 New Vision adopts a newly upgraded 1.3T efficient engine, which is more economical and practical, achieving both high performance and low fuel consumption. Below is an introduction to the Geely New Vision: 1. The overall design of the New Vision adopts Geely's family-style design language, featuring the family-style water ripple grille, paired with a blade-style engine hood and a shark-mouth lower grille. It is equipped with integrated high/low beam headlights, with the eyebrow line and grille designed as a unified element. LED daytime running lights and side mirror light strips enhance safety. 2. The rear of the car uses multiple sharp lines for segmentation, with split tail lights connected horizontally by chrome trim, echoing the integrated spoiler and loop-shaped chrome lower guard. It adopts a new flat torque converter, improving smoothness and reducing vibration and jerkiness. Matched with a 1.5L DVVT all-aluminum engine, both overall performance and fuel economy are enhanced.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.