How to Remove the Rear Seats of a Volkswagen?

1 Answers
SanStephen
07/25/25 8:58am
There are two red buckles on both sides of the rear seats of a Volkswagen. Press the two red buttons on the rear seats simultaneously with both hands and pull downward to release the seats. Then, unfasten the seatbelt buckles on the rear seats to complete the removal. Below is some relevant information about car seats: Car seats are generally divided into two types: leather seats and fabric seats. Leather Seats: 1. Easy to clean. Dust only settles on the surface of leather seats and does not penetrate deep into the material, so a simple wipe with a cloth is sufficient for cleaning. In contrast, fabric seats may require purchasing seat covers, as stains can seep into the interior of the seats. 2. Heat dissipates quickly. A few pats with your hand can disperse the heat, or after sitting for a while, you won't feel the heat. Fabric Seats: 1. The surface is less prone to damage, resulting in a longer lifespan. 2. Provides stable and slip-resistant seating. Sitting on fabric seats does not give a slippery feeling.
Was this review help?
8
3
Share
More Forum Discussions

How to activate the anti-pinch function for Nissan Qashqai windows?

To activate the anti-pinch function for Nissan Qashqai windows, follow these steps: 1. Turn on the ignition switch, then lower the window halfway. Press the window switch to raise the window to the top, and keep holding the switch for 1-2 seconds after the window reaches the top; 2. Release the switch. Taking the 2017 Nissan Qashqai as an example, it is a compact SUV with the following dimensions: length 4384mm, width 1837mm, height 1594mm, wheelbase 2646mm, minimum ground clearance 199mm, and curb weight 1358kg. The 2017 Nissan Qashqai is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 117PS, maximum torque of 190Nm, and maximum power of 86kW, paired with a 6-speed manual transmission.
14
5
Share

What does 10w30 engine oil mean?

10w30 engine oil refers to a multi-grade viscosity all-weather engine oil. The '10w' indicates the low-temperature viscosity performance of the oil in winter, while the '30' represents its high-temperature viscosity performance in summer. The smaller the number before 'w', the better the oil's fluidity at low temperatures, making it easier to start the car. The larger the number after 'w', the better the oil's viscosity in high-temperature environments, resulting in a stronger oil film. Engine oil is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, and its functions include: 1. Lubrication and friction reduction; 2. Assisting in cooling; 3. Sealing and leak prevention; 4. Rust and corrosion prevention; 5. Shock absorption and buffering.
4
5
Share

What Are the Reasons for a Heavy Car Steering Wheel?

Car steering wheel heavy reasons are: 1. Insufficient tire pressure; 2. Contaminated power steering fluid; 3. Internal failure of the power assist system; 4. Poor bearing lubrication. Solutions for a heavy car steering wheel include: 1. Replenishing hydraulic power steering fluid; 2. Replacing circuit fuses; 3. Replacing flat bearings and adding kingpin grease; 4. Increasing lubrication for the steering tie rod ball joints. Steering wheels are categorized into: single-spoke, dual-spoke, triple-spoke, and quad-spoke steering wheels. Their working principle involves transmitting torque to the rack and pinion mechanism, thereby enabling the wheels to turn left or right.
3
4
Share

What does unstable vehicle idle speed mean?

Unstable vehicle idle speed refers to the situation where, after the vehicle is started and in neutral stationary state, the engine speed fluctuates up and down. Severe instability may lead to engine stalling. The causes of unstable vehicle idle speed include: 1. Improper air-fuel mixture ratio in the engine compartment; 2. Prolonged use of spark plugs causing aging of ignition coils, high-voltage wire aging, and leakage issues that reduce ignition capability; 3. Carbon buildup on engine valves and intake ports, where carbon deposits absorb fuel and reduce vehicle power; 4. Malfunctioning coolant temperature sensor. Solutions for unstable vehicle idle speed include: 1. Replacing spark plugs; 2. Cleaning valves and intake ports; 3. Checking the coolant temperature sensor.
19
1
Share

What are the differences between GLA, GLC, and GLK?

The differences between GLA, GLC, and GLK are: 1. Different vehicle types: GLA is a compact SUV; GLC and GLK are midsize SUVs. 2. Different transmissions: GLA has a 7-speed dual-clutch transmission; GLC has a 9-speed automatic manual transmission; GLK has a 7-speed automatic manual transmission. 3. Different body dimensions: GLA dimensions are length 4427mm, width 1834mm, height 1610mm; GLC dimensions are length 4764mm, width 1898mm, height 1642mm; GLK dimensions are length 4556mm, width 1840mm, height 1689mm.
3
1
Share

Where is the domestic BMW production plant located?

Domestic BMW production plants are located in Shenyang. BMW's vehicle models include: BMW X1, BMW X2, BMW X3, BMW X4, BMW X6, etc. Taking the 2021 BMW X1 as an example, it is a compact SUV with body dimensions of: length 4565mm, width 1821mm, height 1620mm, and a wheelbase of 2780mm. The 2021 BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, a maximum torque of 220Nm, and a maximum power of 103kW. It is paired with a 7-speed dual-clutch transmission.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.