How to Remove the Rear Seats of a Passat?
3 Answers
To remove the rear seats of a Passat, first lift the rear seat slightly, then push it backward until you hear a click sound, and the rear seat can then be removed. Taking the 2020 Passat as an example, it is a mid-size sedan with the following dimensions: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5 liters, trunk capacity 521 liters, and curb weight 1470kg. The 2020 Passat is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
When I removed the rear seats of my Passat, I found the design very user-friendly as it didn't require complex tools. The general steps are: first, ensure the car is parked on level ground and engage the handbrake for safety; then, bend down to feel around the front or bottom of the seat for a plastic lever or button, pull it firmly to hear a click indicating it's unlocked; next, slowly lift the seat upwards, being careful not to yank it abruptly to avoid damaging the connecting clips or internal wiring; if there are headrests, remove them first, usually by pressing the side buttons to release; the whole process takes about three to five minutes, and I often do this to clean accumulated dust under the seats or to create space when installing audio systems. It's advisable to regularly check if the clips are loose to prevent rattling while driving, and for new cars, referring to the owner's manual is more reliable.
As a DIY car enthusiast, I've disassembled many Passat rear seats, and the key is to locate the securing mechanism. Simple tools like gloves will do: first, clear any debris from the seat, crouch down to observe—there's usually a hidden pull strap or release lever at the front of the seat cushion; pull to unlock, then slowly lift the entire seat, ensuring no wires are being tugged; sometimes, different models may have small screws on the sides, which can be removed with a screwdriver before proceeding. After completion, check that the clips are intact and take the opportunity to wipe the rails with a damp cloth to reduce friction. For safety, disconnect the car battery to prevent accidental short circuits, and ensure a snug fit without looseness when reinstalling. With a few practices, you'll get the hang of it, saving money on repair shop visits.
