How to Remove the Rear Seats of a Magotan?
2 Answers
The method to remove the rear seats of a Magotan: You need to locate the fasteners where the seat cushion meets the floor on both the left and right sides. Insert both hands on either side of the fasteners and lift upward with force. Once both fasteners are lifted, push the entire seat cushion sharply toward the backrest direction, and it will move smoothly with a horizontal push. Then, lift the entire seat upward to remove it. The dimensions of the Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. This model is equipped with a 1.8TSI engine, which is a new-generation engine from Volkswagen Germany. The new Magotan 1.8TSI and the entire lineup adopt the HSB high-strength body structure design, with 74% of the body structure using high-strength and ultra-high-strength steel plates, significantly enhancing the body structure strength while reducing the vehicle weight.
When doing DIY car repairs at home, I frequently remove and install the rear seats of my Volkswagen Magotan. First, handle the seat cushion: locate the small pull strap or handle under the front edge of the seat, give it a firm pull to release the locking clips, then lift it up gently to remove. Next, detach the backrest: there are usually several fixing bolts at the bottom or side of the seat, just unscrew them with a screwdriver; if it has heating function, don't forget to disconnect the wiring harness. I always wear gloves during the process to avoid dirtying or scratching the interior, and move gently without applying too much force, as the plastic clips can break easily. After removal, it's a good opportunity to clean the dust accumulated under the seats and check the frame for any rust spots. When reinstalling, align the position and press down until you hear a click, indicating it's securely locked. I recommend practicing in the garage first to avoid making a mess on rainy days.
