How to Remove the Rear Seats of a Kia K5?
3 Answers
The method to remove the rear seats of a Kia K5 is: 1. Move the front seats forward; 2. Firmly grasp the upper part of the rear seat backrest and push backward while shaking it to release; 3. Pull the hidden strap under the seat cushion forcefully to separate the plastic clips from the steel plate brackets on the floor, then lift and remove the seat cushion. The Kia K5 is a midsize 4-door 5-seater sedan with body dimensions of 4980mm in length, 1860mm in width, 1445mm in height, and a wheelbase of 2900mm. It is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 125 kW and a maximum torque of 253 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a multi-link independent rear suspension.
Removing the rear seats of a Kia K5, I've done it myself a few times, and it's quite simple. Start by locating the clips or levers at the edge of the rear seat—usually, there's a small handle in the trunk area or under the seat. Pull the seat cushion upward firmly, and you'll feel the clips loosen. Don't worry about using too much force; it's designed to be easily lifted. Once released, the seat cushion can be completely removed, revealing the mounting bolts or slots. Use a small wrench to loosen them. Remember to clear any debris beforehand to prevent items from getting stuck in the gaps. The purpose of removal is usually to replace the upholstery or clean out musty odors—my kids often spill drinks on it, making deep cleaning necessary. The whole process takes about five minutes, and even beginners can try it with just a few small tools on hand.
If you frequently DIY car maintenance like me, you should first familiarize yourself with the structure before removing the rear seats. Locate the fixing points under the seats—the K5 usually has clips or levers. Gently lift the front part of the seat upwards to release the clips, then lift the entire seat with force. Next, deal with the seatbelt connection points by unscrewing the bolts and loosening the fixtures, using a socket wrench for this step. Basic tools like wrenches or pliers will suffice, but avoid excessive force to prevent scratching the interior. It's recommended to disconnect the battery as a precaution during removal, even though the seats don't involve high currents. Removing the seats offers several benefits, such as adding soundproofing material or checking for wire aging. In the past, my car had an unusual noise caused by loose seats, and addressing it promptly helped reduce potential hazards.
