How to Remove the Rear Seats of a Honda Fit?
4 Answers
The Honda Fit is a hatchback model launched by GAC Honda. Below are the steps to remove the rear seats of a Fit: 1. Unscrew the two bolts in the middle of the rear seats, then remove the two clips to detach the rear seats. 2. The top-trim Fit features magic seats in the rear, which can be folded up. Additional information about the Honda Fit: 1. The vehicle's dimensions are 4065 mm in length, 1695 mm in width, and 1525 mm in height, with a wheelbase of 2530 mm. 2. In terms of power, the Fit is equipped with a 1.5L naturally aspirated engine, coded L15B3, delivering a maximum power of 96 kW and a maximum torque of 155 Nm. The engine reaches its maximum power at 6600 rpm and its maximum torque at 4600 rpm.
I've previously removed the rear seats of my Fit by myself, and the process wasn't actually complicated. The first step is to locate the pull loops at the bottom of the seats, usually positioned at the front edge where you can easily reach them. The second step involves pulling upward firmly, and the seat will lift up effortlessly; for the foldable version, you might also need to unlock the small latch on the side first. After removal, the space immediately becomes much larger, perfect for storing bicycles or camping gear, but remember to handle gently to avoid scratching the interior upholstery. If you encounter resistance, don't force it—check if the slots are clogged with dirt, which can be cleaned with a soft cloth. This is how I usually clean dust from the seat crevices, saving a trip to the car shop. Always ensure the car is parked on a level surface for safety, and the whole operation takes just two to three minutes without needing any tools—even beginners can manage it.
Having driven a Fit for over a decade, my seat removal experience taught me not to overlook details. There's a nylon strap retention system under the seat—just lift straight up with moderate force, as excessive tugging can damage the clips. Place removed seat cushions on clean surfaces, avoiding heavy objects that may deform them. I once accidentally broke a seat during removal, resulting in costly repairs, so now I always check the manual for positioning, clean surrounding areas beforehand to minimize dust interference. During reinstallation, align and push back into grooves until hearing a click to confirm locking; otherwise, driving with loose seats is hazardous. Avoid frequent disassembly to prevent accelerated wear—occasional removal for deep cleaning or bulky items suffices. Remember these tips for safe, hassle-free operation, especially when inspecting before long trips to ensure everything's secure.
Removing the rear seats of a Fit is technically straightforward. The seats are secured with clips—locate the release lever at the bottom, gently pull it up, and lift at an angle of about 40 degrees to detach. The design is clever, with no screw interfaces, relying mainly on nylon straps and plastic hooks for locking, so don’t worry about complexity. Keep your hands steady during the process to avoid slippage and injury. After removal, test the reinstallation to ensure a snug fit. If you're modifying or cleaning, this step is time-efficient and a great method for routine maintenance.
