How to Remove the Rear Seats of a Haval H2?
2 Answers
First, use a tool to separate the two plastic clips inside the buckle, then pull the U-shaped steel ring out of the buckle. Next, insert a larger Phillips screwdriver into the buckle to spread the two small clips inside, allowing the rear seats to be removed. Excessive force may damage the clips underneath, requiring the purchase and installation of new buckles. Method to lift the rear seats: 1. Under the headrests on both sides of the rear seats, there is a switch; press it and push forward. 2. The backrest can be folded; open the rear trunk and look under the seat (if not visible, it might be pressed under the seat) for a black strap, then pull it backward and lift the seat upward. 3. Hook the strap onto the headrests of the front seats, and adjust the tightness of the strap.
I just removed the rear seats of my Haval H2 last week to make space for my bicycle. The process was quite simple – there are usually two clips at the bottom of the seat cushion. Just pull straight upwards with force, and the cushion will pop out. The H2's rear seat backrest has a fixed design and generally doesn't need removal. If you must remove it, check for screws at the seatback connection points, though the manual doesn't recommend user operation. After removal, thoroughly clean the exposed carpet to prevent dust buildup, and check that the seatbelt anchors aren't loose. The whole process took me less than five minutes. Safety tip: Park on level ground with the engine off, and wear gloves to prevent scratches. When reinstalling the seat cushion, align it with the clips and press gently until you hear a 'click' to confirm it's locked. It'll be even easier to remove and reinstall next time.
