How to Remove the Rear Seats of a Great Wall Haval H6
2 Answers
The method for removing the rear seats of a Great Wall Haval H6 is as follows: 1. Park the car in a safe location; 2. Pry off the plastic cover of the screws beneath the rear seats; 3. Remove the protective plastic cover to reveal the screws inside; 4. Use a socket wrench to unscrew the screws; 5. Once both screws are removed, the seat can be taken out. Taking the 2021 manual urban edition Great Wall Haval H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, with a wheelbase of 2680mm, a fuel tank capacity of 58 liters, and a trunk capacity of 1296 liters.
I've taken apart the rear seats of a Great Wall Haval H6 several times, and it's quite simple. Usually, there are clips under the seat. For the seat cushion part, first locate a small protrusion or fixed point in the middle under the seat, then lift it upward with some force until you hear a click—that means it's released. After that, you can remove the entire seat. The backrest is even easier—it's usually secured by metal hooks or screws at the bottom. Just unscrew them with a screwdriver and push forward to remove it. Remember not to use too much force, as the clips can break easily. Last time I removed them, cleaning the carpet became much easier, and I could fit in a large piece of luggage. You don’t need any complicated tools—just gloves to protect your hands. If it's your first time, it's best to check the owner's manual, as some models have slightly adjusted clip positions to avoid breaking them and wasting money. After removal, also check if the clips are intact to ensure the seat stays secure and prevents rattling.
