How to Remove the Rear Seat of the Volkswagen New Santana?

1 Answers
SanCassandra
07/29/25 11:55pm
Volkswagen New Santana rear seat removal method: 1. First, remove the right-side fixing buckle of the rear seat; 2. Remove the left-side fixing buckle; 3. Separate the rear seat safety belt buckle, and the rear seat can then be removed. The Volkswagen New Santana is a sedan with a body length of 4546 mm, a width of 1710 mm, and a height of 1427 mm. In terms of appearance, a major improvement in the front part of the car is the fully integrated headlights, with the spherical shape of the high beam located inside. The front headlight illumination system uses circular projection lamps, and there is a horizontal strip-shaped position light at the lower part of the headlight, reflecting light from all directions. This projection lamp enhances safety by improving nighttime illumination.
Was this review help?
14
4
Share
More Forum Discussions

Are the reference points the same for right-side and left-side reverse parking?

There are both similarities and differences in the reference points for right-side and left-side reverse parking. Common issues during reverse parking are as follows: 1. How to correct if steering too early: If you steer too early, the distance between the car body and the right front corner of the parking space will be less than 30 cm. If it's slightly less than 30 cm, you can turn the steering wheel back half a turn; if you're about to hit the corner, you need to straighten the steering wheel. 2. How to correct if steering too late: Keep the steering wheel fully turned while entering the parking space, and when the car body is parallel to the side line, still do not straighten the steering wheel; let the car enter the space diagonally, which will create distance between the car and the left side line; after creating enough distance, straighten the steering wheel and adjust slightly to align the car body. 3. How to correct if the car body is tilted: Use the left and right rearview mirrors to determine which side the car body is leaning towards. The principle of adjustment is to steer in the opposite direction of where the rear of the car is leaning.
16
5
Share

What Causes High Fuel Consumption in Yuchai Engines?

High fuel consumption in Yuchai engines may be caused by clogged air filters or exhaust pipes, leading to poor air intake and excessively rich fuel mixture. Alternatively, it could be due to engine coolant temperature being too high or too low. If the coolant temperature is too high, the coolant may boil easily, reducing power output and increasing fuel consumption. If the coolant temperature is too low, the fuel mixture may not atomize properly, decreasing engine power and increasing fuel consumption. Below are some common causes of high fuel consumption: 1. Improper driving habits: Fuel consumption is closely related to the driver's habits, such as prolonged idling without turning off the engine or frequent ignition, aggressive acceleration or frequent braking, driving at high speeds in low gears or low speeds in high gears, etc. These habits significantly 'contribute' to increased fuel consumption. 2. Abnormal tire pressure and tire wear: Low tire pressure increases friction between the tires and the ground, raising resistance and fuel consumption. Normal tire pressure is around 2.5 bar, which can be slightly reduced by 0.1 bar in summer. However, tire pressure should not be too high either; it's best to inflate according to the vehicle's standard values. Additionally, severely worn tires may frequently slip, also increasing fuel consumption. 3. Fuel quality and carbon deposits: Many drivers overlook fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting air intake and fuel mixture quality, and drastically increasing fuel consumption. Therefore, fuel quality should not be ignored. Regular maintenance at a 4S shop is a forward-looking investment, ensuring normal vehicle performance and saving unnecessary expenses in the long run.
18
1
Share

Can a Hybrid Car Still Run When the Battery is Dead?

Hybrid vehicles can still operate when the battery is depleted. Relevant details are as follows: 1. Introduction: Hybrid vehicles typically start by using the lithium battery for power. Once the lithium battery is depleted, the system automatically switches to the gasoline engine, functioning similarly to a conventional fuel-powered car, thus allowing continued operation. 2. Battery: If the hybrid car's battery is completely dead and cannot start the engine, the vehicle will not operate normally. This is because the ignition power supply system and the hybrid system are separately powered, requiring a battery replacement in such cases. 3. Charging: Once the lithium battery module in a hybrid vehicle is depleted, it needs to be recharged promptly to ensure readiness for the next drive.
9
3
Share

What is the fuel consumption per kilometer for hybrid vehicles?

Hybrid vehicles consume approximately 2 liters per kilometer. Below is an introduction to hybrid vehicle-related content: 1. Hybrid Vehicles: Hybrid electric vehicles (HEVs) combine fuel and electric power, utilizing an electric motor as an auxiliary power source to assist the engine, with the engine being the primary power source. 2. Characteristics of Hybrid Vehicles: The electric motor assisting the engine provides strong and smooth power during normal driving. They contribute to energy conservation and emission reduction. Being fuel-efficient, they use electric power for low-speed driving and switch to fuel only during high-speed driving when greater power output is required, thereby reducing fuel consumption and making them suitable for urban driving.
10
0
Share

What kind of glue can be used to fix a leaking fuel tank?

Epoxy resin adhesive can be used to repair a leaking fuel tank. Epoxy resin adhesive is the most common industrial adhesive, and its high strength makes it effective for patching fuel tank leaks. The meanings of E and F on the fuel gauge are as follows: 1. E: E stands for Empty, indicating that the fuel in the tank is insufficient or nearly depleted. 2. F: F stands for Full, indicating that the tank is full. Additionally, when the car is low on fuel, a warning light will illuminate on the dashboard; the fuel warning light typically resembles a fuel tank icon, and it is important to pay extra attention at this time to avoid losing power while driving.
1
3
Share

How many times can you practice for the Subject 2 mock test?

Mock tests at the examination center require payment. Typically, one mock test fee allows for two practice laps. If there are not many people scheduled, you can pay for two sessions to practice four laps. The following are important notes for Subject 2: 1. Adjust the seat properly: Before starting, ensure the seat is adjusted and the seatbelt is fastened before fingerprint verification. 2. Follow the test rules: Each test item at the examination center is monitored by GPS positioning. The control line (yellow dashed line) for each item marks the test area. Once the front of the vehicle crosses the control line, it means you have entered the test for that item and must complete it according to the rules. 3. Correct mistakes promptly: If you notice an operational error, correct it immediately to ensure accuracy and minimize point deductions.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.