How to Remove the Rear Seat of the Changan Eado?
3 Answers
The method to remove the rear seat of the Changan Eado is as follows: Lift the rear seat cushion forcefully to reveal three screws. Remove these three screws to completely detach the rear seat. This model comes standard with dual front airbags, ABS anti-lock braking system, while higher trim levels include electronic stability control and brake assist systems. Taking the 2020 Changan Eado as an example, it is a compact car with body dimensions of 4730mm in length, 1820mm in width, and 1505mm in height, with a rear track width of 1566mm. The car is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 158PS, a maximum torque of 260Nm, and a maximum power output of 116kW.
I've been driving the Changan Eado for over three years, and just last week I took apart the seats for cleaning. Removing the rear seats of this car is super simple. First, make sure the front seats are moved forward to create space. Then crouch down to the rear floor and look for two plastic clips at the front of the seat base. Press them gently with both hands or a flathead screwdriver until you hear a click, then release and lift the entire seat cushion upward to remove it. Don’t use too much force the first time—I once nearly broke a clip and had to pay a small repair fee. Cleaning is much easier after removal, and reinstalling just requires aligning and pressing firmly. The whole process takes me less than ten minutes, and I often do it on weekends to add a new cushion. Remember to work in good lighting—replacing broken clips can be tricky, so I recommend watching online video tutorials first to avoid wasted effort.
As an enthusiast who frequently modifies cars, dismantling the rear seats of the Changan Eado doesn't require any high-end tools. Generally, you can sit on the rear seat floor, reach for the central position at the front edge of the seat, where there's a hidden latch point; just press firmly or locate the small pull strap and lift it. Some models have separate left and right seat cushions, each with its own independent release mechanism. After removal, it's best to check the tracks for any debris, and adding a seat heating pad or moisture-proof layer is more practical. Take your time during the process, proceed step by step to avoid damaging the latches, which could affect reinstallation. The entire process takes no more than five minutes, and household gloves and a cloth are sufficient tools. I've found that keeping the latches lubricated after cleaning can extend their lifespan, and doing this regularly saves time and effort.
