How to Remove the Rear Seat of Changan Eado?

[AmirRose]

Firmly lift the rear seat cushion to reveal three screws. Removing these three screws will allow the complete removal of the rear seat. Below is relevant information about the Changan Eado: 1. The 2014 Changan Eado is equipped with two engines: a 1.5L turbocharged engine and a 1.6L naturally aspirated engine. 2. The 1.6L naturally aspirated engine has a maximum power of 92kW, a maximum torque of 160Nm, a maximum power speed of 6000 rpm, and a maximum torque speed range of 4000 to 5000 rpm. 3. The 1.5L turbocharged engine has a maximum power of 125kW, a maximum torque of 230Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1950 to 4500 rpm.

[VonKiara]

As someone who frequently works on my own car, I've removed the rear seats of a Changan Eado several times. The steps are actually quite simple: First, bend down and look for a small pull ring or clip at the front edge under the seat cushion. Give it a firm pull to release the latch. Then lift the seat cushion upward, and it will come off naturally. The seat back is slightly more complicated—you'll need to open the trunk and check the sides for any screws or hooks securing it. Use a screwdriver to loosen them, and it can be removed. Be gentle throughout the process, applying force gradually to avoid scratching the interior. Removing the rear seats makes it easier to clean the car or check if the carpet underneath is damp. I've used this opportunity to clear out a lot of dust and stains myself. Always remember to turn off the engine for safety, and wearing gloves is a smart way to protect your skin.

[OJesse]

My family has also been driving a Changan Eado for several years, and the rear seat removal is mainly for cleaning purposes. The general method is to crouch down, locate the release hook in front of the seat, gently pull it to release the seat cushion, and then lift it upwards. For the seatback, you need to check the fixing screws on the sidewall of the trunk and unscrew them. Pay attention to details to avoid damaging any wiring or plastic parts, as the car's interior can't withstand forceful pulling. If you fail on your first attempt, don't force it—seek help or look up instructional videos online for assistance. Removing the rear seats makes cleaning easier, especially when dealing with snacks spilled by children, allowing for timely cleaning to prevent odors.

[DeAliyah]

Removing the rear seats is quite simple. Just locate the pull strap in front of the seat and give it a tug to detach the seat cushion. Then, remove the screws in the trunk to take off the seat back. The entire process takes just a few minutes—just don’t rush and damage anything. Once removed, you can clean or modify the space easily; I’ve even upgraded my audio wiring. Remember to turn off the engine before starting and wear gloves for safety.

[LillianMarie]

I often help people with car repairs. The key to removing the rear seats of the Changan Eado is locating the fixing points. The seat cushion pull ring is right underneath—just pull it and lift upward. For the seat back, go into the trunk to find and unscrew the bolts. Avoid forceful pulling to prevent clip breakage; the car's design is generally robust for damage-free removal. A regular wrench is sufficient for tools, but when reinstalling, test if it's securely locked to prevent wobbling that could affect driving safety. Beginners should practice first before attempting the real task—removing rear seats helps with moisture removal or checking for oil leaks.