How to Remove the Rear Seat of Buick Verano?

1 Answers
OAngelina
07/30/25 1:28am
Method for removing the rear seat of Buick Verano: 1. There is a pull strap in the middle of the rear seat of the Buick Verano. Pull the inner side of the strap upwards to lift and remove the rear seat; 2. After removing the rear seat, there are hooks on both the left and right sides of the seat, which should also be removed; 3. Once the hooks on both sides are removed, the backrest has a release mechanism near the door. Pull the handles on both sides to fold down the backrest. Note that the rear seat seatbelt also needs to be unlatched, and then the rear seat can be completely removed. The Buick Verano is a mid-size sports sedan under SAIC-GM Buick. In terms of body dimensions, its length, width, and height are 4723mm, 1802mm, and 1466mm (1476mm) respectively, with a wheelbase of 2700mm.
Was this review help?
4
4
Share
More Forum Discussions

How many kilometers can one liter of combustible ice run?

1 liter of solid combustible ice can allow a car to travel 13 to 26 kilometers. Combustible ice: Natural Gas Hydrate/Gas Hydrate, also known as combustible ice, is an ice-like crystalline substance formed by natural gas and water under high pressure and low temperature conditions. Because of its appearance resembling ice and its ability to ignite upon contact with fire, it is called "Combustible Ice," "Solid Gas," and "Gas Ice." Natural gas hydrates are distributed in deep-sea or permafrost regions. After combustion, they only produce a small amount of carbon dioxide and water, with pollution far less than coal, petroleum, etc., and they have enormous reserves. Therefore, they are internationally recognized as alternative energy sources to oil. Distribution of combustible ice: Natural gas hydrates are widely distributed in nature on continental and island slopes, uplifts of active and passive continental margins, polar continental shelves, and deep-water environments of oceans and some inland lakes. Under standard conditions, one unit volume of natural gas hydrate decomposition can produce up to 164 unit volumes of methane gas.
4
5
Share

How to Disassemble a Lavida Hatchback Car Key?

Method to disassemble the Lavida Hatchback car key: 1. Open the mechanical key and locate the central seam on the side of the mechanical key; 2. Use a flat-head screwdriver to pry it open. The car key is divided into two parts. Then pry open the remote control part to reveal the circuit board. A car key refers to the tool used to switch the car on and off. Modern car keys all use chips, which are part of a magnetic chip system. The reading coil in the car's ignition lock cylinder will read the chip in the key, as each chip contains fixed digital information. The Lavida Hatchback is a compact car model launched by Shanghai Volkswagen. Taking the Lavida Hatchback 2017 230TSI Manual Comfort Edition as an example, its dimensions are 4445mm in length, 1765mm in width, and 1485mm in height, with a wheelbase of 2610mm. The body structure is a 5-door, 5-seat hatchback.
9
4
Share

Can I add water when the radiator is out of water?

When the car radiator is out of water, it is absolutely forbidden to add water while the engine is hot. The high-pressure hot gas inside can cause burns, and adding room-temperature coolant may cause the engine to crack. Correct method: Wrap the radiator cap with a wet towel, slowly open the first switch (about 1/4 turn), wait for the steam pressure to be completely released, then fully open the radiator cap. If the water level is insufficient, slowly add water up to near the maximum mark. Tip: When encountering a high water temperature alarm, first reduce speed, then pull the car to the roadside. Do not rush to turn off the engine, as excessively high water temperature can cause the piston, cylinder walls, cylinder, crankshaft, etc. to overheat, thinning the engine oil and losing its lubricating effect. If the engine is turned off at this time, the components are in an expanded state with very small gaps between parts. This may cause some soft metals to fall off after shutdown, and in some cases even lead to cylinder sticking.
12
3
Share

What is the difference between an inertia car and a pull-back car?

Inertia cars and pull-back cars differ in terms of construction, working principle, and direction of movement. Construction differences: An inertia car has a relatively large and heavy flywheel inside, requiring it to be pushed forward before being released to move forward; a pull-back car has a spring inside, requiring it to be pushed backward before being released to move forward. Principle differences: Inertia car principle: The 'flywheel' mechanism in an inertia car demonstrates its mechanical principle. When the rear wheels move backward or forward, they drive the flywheel to rotate rapidly in the opposite direction, storing rotational kinetic energy like a spring. When released, this energy is discharged, causing the car to move forward due to inertia for a certain distance. Pull-back car principle: The 'axle' connected to the rear wheels of a pull-back car is fixed to the internal gear of the pull-back mechanism. When the car is pulled backward, the rear wheels rotate in the same direction, transferring motion through the 'axle' to the gears, which then drive the pull-back mechanism to propel the car forward. Direction of movement differences: Inertia cars can move both forward and backward due to the 'flywheel' mechanism. Pull-back cars can only move in a fixed, single direction.
13
0
Share

How to start the Lavida when the key fob battery is dead?

Starting method for Lavida when the key fob battery is dead: You can take out the mechanical key, open the car door, then place the remote key near the induction area or close to the start button to start the vehicle. Each remote key contains an electromagnetic coil that emits microwaves. The start button also has an electromagnetic coil to receive these microwaves and transmit them to the vehicle's computer. The computer then analyzes whether the key matches, and if successful, the vehicle will start. The Lavida is an A-class sedan produced by SAIC Volkswagen. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of power, the Lavida 2021 280TSI DSG Comfort Edition is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
3
0
Share

Does Exceeding the Oil Level Upper Limit Affect the Engine?

Exceeding the upper limit of engine oil can have several negative effects on the engine: reduced power, increased fuel consumption, more carbon buildup, worsened exhaust emissions, and potential engine oil leaks. Below are the methods for adding and measuring engine oil: 1. Method for Adding Oil: There is a yellow pull ring in the engine compartment, which is the car's oil dipstick. Pull it out, and at the very end of the dipstick, there are two marked lines (or sometimes two holes), representing the upper and lower limits of the oil level. The engine oil level must be maintained between these two marks—neither too much nor too little. 2. Do not measure the oil while the engine is running or immediately after stopping the car, as this can lead to inaccuracies. Generally, you should wait at least 15 minutes after the car has been turned off to allow the oil to fully drain back into the oil pan. Additionally, ensure the car is parked on a level surface (if the car doesn't move when the handbrake is released and the gear is in neutral, the surface is level). 3. Measuring Method: Pull out the oil dipstick, wipe it clean with a tissue, reinsert it, then pull it out again to check the oil level.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.