How to Remove the Rear Seat Cushion of a Kia K3?

1 Answers
VanRachel
07/29/25 10:33am
Kia K3 rear seat cushion removal steps are as follows: 1. First, press the button under the rear seat of the Dongfeng Yueda Kia K3; 2. Remove the fixing screws of the Kia K3 rear seat; 3. Take off the rear seat cushion of the Kia K3; 4. Remove the fixing screws of the Kia K3 rear seat backrest; 5. The rear seat of the Dongfeng Yueda Kia K3 is now successfully removed. Note that the Kia K3 rear seat backrest has fixing screws located in the gap between the seat and the backrest, and a 12mm socket is required to remove the internal fixing screws.
Was this review help?
14
1
Share
More Forum Discussions

How to Change Lanes with One Solid and One Dashed White Line?

In the same straight line containing both solid and dashed lines, the dashed line allows for lane-changing maneuvers such as crossing the line, while the solid line prohibits crossing. The edge white solid-dashed line evolved from the central yellow solid-dashed line. Once you understand the meaning of the central yellow solid-dashed line, you can comprehend its purpose. The central yellow dashed line is located in the middle of a two-way motor vehicle lane. The solid line prohibits vehicles from crossing, while the dashed line permits vehicles to cross for overtaking or merging right. The edge white solid-dashed line is situated between the exit of a motor vehicle lane and the adjacent motor vehicle lane, requiring vehicles to travel in the same direction.
4
2
Share

How to Remove the Spare Tire of a Mercedes-Benz Viano?

Take out the tools from the right side, remove the tire nuts, and after loosening them by about 10 centimeters, you will notice the tire coming out from below, allowing you to take it off. Then, open the outer cover panel on the rear trunk floor, and the spare tire can be removed. Before removing it, make sure to detach the outer cover panel of the spare tire. Use a flat-head screwdriver to remove the decorative cover. It is recommended to clean any particularly dirty areas while you're at it. Then, completely remove all four screws, place the jack, and continue loosening the screws. After installing the new tire, you can then tighten the screws.
14
1
Share

What are the differences between BYD Han DM and DM-i?

The following are the differences between BYD Han DM and DM-i: 1. Exterior: The DM-i and Han DM share the same design language, featuring a hexagonal front grille, but the DM-i version adopts a closed front fascia. Details like headlights and taillights show minimal differences between the DM-i and current DM versions. The curb weight of the DM-i version is 1870kg. 2. Powertrain: The Han DM-i is equipped with a dedicated 1.5T Xiaoyun plug-in hybrid engine, differing from the DM version with a larger base displacement and distinct thermal efficiency. According to BYD's DM-i system roadmap, there will be two variants in the future: a long-range version supporting fast charging and a standard-range version.
10
0
Share

What are the Buick models with three-cylinder engines?

Buick models with three-cylinder engines include: Excelle, Verano, Excelle GT, and GL6. A three-cylinder engine consists of three cylinders. Inside, three identical single cylinders are arranged on a single engine block sharing one crankshaft to output power. The working principle of a three-cylinder engine is: when converting the chemical energy of gasoline into thermal energy, the mixed gas inside the sealed cylinder burns and expands, thereby pushing the piston to perform work, converting thermal energy into mechanical energy. Taking the 2020 Buick Excelle as an example, it is a compact car with body dimensions of: length 4468mm, width 1765mm, height 1469mm, and a wheelbase of 2611mm.
5
5
Share

How to Deal with Hydraulic Cylinder Oil Leakage?

Valve spool stuck or valve hole blocked. At this time, the contamination of the hydraulic oil should be checked; the wear condition of the valve body should be inspected. Piston rod and cylinder barrel stuck or hydraulic cylinder blocked. In this case, check whether the seal of the piston and piston rod is too tight; whether the sealing components have failed. Control pressure in the hydraulic system is too low. At this time, check the control pressure source to ensure the pressure is adjusted to the system's specified value. Air entering the hydraulic system. At this time, check the liquid level of the hydraulic oil tank. Slow initial movement of the hydraulic cylinder. The improvement method is to replace the hydraulic oil with better viscosity-temperature performance.
14
3
Share

Is the imported BMW 1 Series rear-wheel drive?

BMW 1 Series imported is rear-wheel drive, adopting a front-engine rear-wheel drive layout. As a compact car, the rear-wheel drive configuration enhances the vehicle's dynamic performance. In rear-wheel drive cars, the rear wheels are responsible for propulsion while the front wheels handle steering, resulting in more responsive handling and significantly improved maneuverability. The BMW 1 Series offers three powertrain options: 1.5T, 2.0T, and 3.0T turbocharged engines. The vehicle's dimensions are 4456mm in length, 1803mm in width, 1446mm in height, with a wheelbase of 2660mm.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.