How to Remove the Rear Headrest of the Equinox?
4 Answers
The method to remove the rear headrest of the Equinox is to locate the plastic circle on the lower left side of the rear seat headrest, press the pinhole on the side of the circle with a needle while holding the height adjustment button, and then pull the headrest upward to remove it. Below are the usage instructions for the rear headrest: 1. Properly adjust the angle between your body and the seat. Keep your back as upright as possible, with a gentle angle between your neck and body to reduce injury in the event of a rear-end collision. 2. Correctly adjust the distance between the back of your head and the headrest. The smaller the gap, the better, preferably no more than 10 cm. This helps cushion the neck during a rear-end collision. 3. Properly adjust the height of the headrest. The headrest should be positioned at least parallel to the top of your ears or about 8.89 cm below the occupant's head. After adjusting, firmly secure the headrest to prevent it from moving.
Removing the rear headrests of the Equinox is actually quite simple. I do it often myself, especially when cleaning seat covers or folding down the seats to transport large items. You just need to locate the small button or slot on the side of the headrest posts, press it gently to release the lock, then slowly lift the headrest upward with both hands. Avoid yanking it forcefully to prevent jamming or scratching the seats. Make sure the vehicle is turned off and parked on level ground before operating for safety. If the button feels stuck, check for dust or debris blocking it and clean with a cotton swab. I recommend doing this while seated in the car for easier operation rather than standing and straining. Removing the headrests makes seat cleaning easier and improves space utilization, which is quite useful for daily maintenance.
As a seasoned veteran who has worked with cars for years, the key to removing rear headrests lies in locating the release mechanism. Equinox headrests typically feature plastic buttons on the side of the posts - press them while firmly lifting upward. If buttons feel stiff or unresponsive, avoid forcing them as the spring might be stuck; try gently wiggling or applying WD-40 lubricant. Always consult the owner's manual beforehand to confirm positioning and prevent mistakes. No tools are fundamentally required (bare hands suffice), though gloves can improve grip. Upon reinstallation, listen for the audible click to confirm secure locking - safety comes first, as loose headrests compromise crash protection. Though seldom adjusted, the entire removal/installation process takes just two minutes.
I just learned how to remove the rear headrests in my car! Yesterday, when I needed to fold down the seats, I found a small button right next to the rod. Pressing it released the headrest, and then I could easily pull it out—super quick and simple. Don’t worry about it being difficult; the Equinox is designed for easy operation, and the button is clearly visible. If you’re not very strong, just pull gently, or use a bit more force if needed. Removing them makes the seats lie flat, which is great for loading larger items or cleaning out dust. After trying it, I realized there’s no special skill required—even a beginner can get the hang of it right away.
