How to remove the rear door handle of a Kia K5?
3 Answers
On the corresponding door frame of the rear door handle, there is a black rubber plug on the inner side. Remove it, loosen a screw inside, take off the small block behind the door handle, and then pull the door handle backward to remove it. Below are the steps to remove the rear door handle of a Kia: 1. First, prepare a flat-head screwdriver and a T-20 spline. There is a black rubber piece inside the door used to cover the door handle screw. Gently pry off this small clip by hand, and then you will see the screw that secures the door handle. Remove the screw. 2. Use the flat-head screwdriver to gently pry open a gap between the small cover of the door handle and the lock cylinder. Pull outward by hand, and the lock cylinder and small cover can be removed. Hold the door handle with your hand and pull backward to detach the Kia rear door handle.
I've always been passionate about DIY car repairs and have removed the Kia K5 rear door handle several times. The key lies in patience and tools: you'll need a flathead screwdriver and a pry tool to open the door panel. Avoid using brute force—gently wedge the pry tool into the panel edge and push to remove the plastic clips, revealing the internal structure. Then locate the screws securing the handle—usually under a cover—unscrew them, and carefully pull out the handle, remembering to disconnect any wiring like the door lock sensor. When installing new parts, align the slots properly to prevent looseness or rattling. The whole process takes about 10 minutes, but keep the workspace tidy to avoid losing small components. Basic household tools suffice, making DIY both fun and cost-effective. After completion, always test functionality before closing the door to ensure safety.
I've disassembled the rear door handle of my Kia K5 myself, and as an ordinary car owner, I found the steps quite understandable. First, prepare a Phillips screwdriver and soft tools like a pry bar or an old credit card. After opening the door, gently pry up the edge of the interior trim panel, carefully removing the clips without breaking them. Once the trim panel is off, check for any hidden screws near the handle and unscrew them. Gently pull out the handle, and if there are any electrical connectors, unplug them—be especially careful not to yank them forcefully. When reassembling, align the handle properly and press it into place, then check if the switch operates smoothly. The whole process requires simple tools and minimal cost, but it's advisable to take notes to avoid forgetting steps. Common issues include losing small screws or scratching the surface, so laying a cloth over the work area is a good idea. Don’t worry about beginner mistakes; watching video tutorials can make the job easy.
