How to Remove the Rear Bumper of a Sylphy?

1 Answers
MacAdalynn
07/30/25 12:52am
Sylphy rear bumper removal method: Remove the fixing screws near the fender and taillight, then pry along the edge of the bumper to separate and remove it. Below is the installation method: During installation, align the plastic clips with the buckles and slowly push them back into place, you can tap them tight by hand, then reinstall the screws in their original positions. Here are some relevant details: 1. The 2021 Sylphy has dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm, and the body type is a 4-door 5-seater sedan. 2. In terms of power, this car is equipped with a 1.6L L4 naturally aspirated engine, delivering a maximum horsepower of 135ps and a maximum torque of 159nm.
Was this review help?
6
4
Share
More Forum Discussions

How Long Can a 2009 Car Still Be Driven?

The scrapping time of a 2009 car depends on specific circumstances: 1. Determining scrapping based on time limit: According to the previous 15-year scrapping regulation, a 2009 car could still be driven for four years until scrapping in 2024. However, the current regulation determines scrapping based on mileage, with the maximum mileage being 600,000 kilometers. Cars that have been used for 20 years without being scrapped must undergo inspections four times a year. 2. Determining scrapping based on mileage: The maximum mileage is 600,000 kilometers. Cars that have been used for 20 years without being scrapped must be inspected four times a year. However, if a car's mileage reaches 600,000 kilometers, the government will guide the scrapping of such vehicles.
2
2
Share

Where is the fuel tank button on the Volkswagen Lavida?

The Volkswagen Lavida does not have a fuel tank button. To refuel, you need to press the fuel tank cover inward, and it will automatically pop open. Here are the specific steps for refueling the Lavida: 1. The fuel tank is located on the right side of the car. When refueling, approach from the passenger side. To open the fuel tank cover, you must go to the fuel tank location. 2. Once at the fuel tank location, press the fuel tank cover for 1 second to open it. The fuel tank cover cannot be opened while the engine is running, so the steps are: turn off the engine, take the key, and press the fuel tank cover. 3. Turn the inner cap clockwise to open the fuel tank, and you can then proceed to refuel.
15
3
Share

What Are the Effects of Water Getting Inside Car Doors?

Water entering car doors can corrode internal circuits and cause rusting of metal components in the vehicle. Precautions: If the car door becomes deformed or accumulates excessive dust, asphalt, mud, etc., around the valve area, it can lead to blockage of the drainage valve, thereby affecting the drainage rate. Consequences of Neglect: If water ingress in car doors is left untreated, it can corrode internal circuits, cause rusting of metal components in the vehicle, and also affect the operation of power windows. Drainage Methods: If there is a significant amount of water, you can disassemble the car door to check for water in the wiring pipes, power window mechanisms, and door switches. Dry the water manually or with a blower, then reassemble the door as it was.
2
2
Share

Can a C1 driver's license drive a yellow-plate vehicle?

C1 driver's license is not classified by the color of the license plate, but by the type of vehicle permitted. Here are the relevant explanations: 1. C1 permitted vehicle types: According to traffic regulations, a C1 driver's license allows driving small low-speed trucks, so even if it's a yellow-plate vehicle, it depends on the type of vehicle. Under China's traffic laws, the permitted vehicle types for a C1 driver's license include small/micro passenger vehicles, light/micro cargo vehicles, light/micro special operation vehicles, low-speed cargo vehicles, and three-wheeled vehicles. 2. Illegal driving: If driving a vehicle that does not match the permitted type of the driver's license, the driver will be penalized with a deduction of 12 points and a fine of up to 2000 yuan, serving as a reminder to comply with traffic rules.
14
5
Share

What is the reason for the wrench light appearing on the car?

The reason for the wrench light appearing on the car is: The vehicle's maintenance period has been reached, and preventive work is required, including inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts. The method to eliminate the wrench indicator light is: 1. Turn the key to the power-on position; 2. Press and hold the button on the dashboard for about 10 to 15 seconds, and the wrench symbol will disappear. The items for car maintenance include: 1. Changing the engine oil and oil filter; 2. Checking the brake system; 3. Checking the tires; 4. Checking the chassis; 5. Checking the car's tie rods; 6. Checking the shock absorbers. Indicators on the dashboard include: battery indicator, fuel indicator, turn signal indicator, seat belt indicator, electronic throttle indicator, and recirculation indicator.
19
2
Share

Where is the Car Interior and Exterior Temperature Sensor Located?

Car interior and exterior temperature sensors are located at the front bumper grille. Below is an introduction to the sensor-related content: 1. System: The rain sensor is an optical system in the infrared band, with a light-emitting component responsible for emitting infrared rays. When the glass surface is dry, almost 100% of the light is reflected back, allowing the sensor to receive a large amount of reflected light. The system then defaults to clear weather and does not activate the wipers. 2. Function: The automatic rain-sensing wipers detect rainfall and automatically adjust their speed, eliminating the need for manual wiper adjustment. This removes manual operation, ensuring the driver's clear visibility at all times, making trips safer and more comfortable, thereby enhancing driving comfort and safety.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.