How to Remove the Rear Bumper of a Sylphy?

1 Answers
Reginald
07/25/25 1:36am
Sylphy rear bumper removal method is as follows: 1. The rear bumper is secured by screws and clips. First, locate the fixing screws on the fender and remove them one by one, keeping the screws safe. 2. Then open the trunk, where there are fixing screws near the taillights that are quite hidden. It's recommended to use a flashlight to assist in locating and removing them. 3. After all screws are removed, only clips remain. Gently pull along the edge of the bumper outward, taking care to do it slowly to avoid breaking the plastic clips inside. Once separated, the bumper removal is complete.
Was this review help?
19
1
Share
More Forum Discussions

How many years can a normal car battery last?

Normal car batteries can last 2 to 4 years. Car batteries are divided into maintenance-free batteries and regular batteries (lead-acid batteries). Currently, most car models use maintenance-free batteries, while many Japanese cars use regular batteries. The electrodes of regular batteries are made of lead and lead oxide, with the electrolyte being a sulfuric acid solution, and their lifespan is generally about 2 years. Therefore, replacing them every two years is reasonable. Maintenance-free batteries are relatively more durable and usually need to be replaced every 3 years. To extend the battery's lifespan, regular maintenance is required, along with good driving habits. When the electrolyte is insufficient, the battery won't hold a charge, so it's necessary to replenish it promptly.
1
4
Share

What causes a car to stall immediately after starting?

The reasons why a car stalls immediately after starting are: 1. The vehicle's anti-theft system is triggered, locking the engine; 2. Ignition switch failure, caused by poor contact of internal contacts in the ignition switch, where the ignition line has power during startup but loses power when the key is released; 3. Damage to the ignition module or the ignition reference signal line from the ignition module to the engine computer; 4. Too low fuel system pressure, such as low fuel pump pressure, fuel line leakage, small supply current, or damaged fuel pressure regulator; 5. Additionally, if the fuel pump does not pump fuel, the same phenomenon occurs during the first dozen or so startups—the car can start but stalls immediately afterward.
19
5
Share

How to Turn on the Car Air Conditioning in Summer?

To turn on the car air conditioning in summer, follow these steps: After starting the vehicle, press the AC button and turn the knob toward the blue direction. Blue indicates cool air, while red indicates warm air—choose the correct setting. Regarding fan speed, the higher the gear, the stronger the wind speed. The car air conditioning is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the vehicle to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue. Things to note when using the air conditioning: 1. Do not rush to turn on the air conditioning—if it is turned on immediately after starting the car, it will increase the engine load and cause damage. 2. Adjust the air vents upward to maximize the air conditioning effect. 3. Do not sleep in the car with the air conditioning on when the engine is turned off.
5
4
Share

How to reset the maintenance light on Honda CR-V?

Honda CR-V maintenance light reset method is as follows: 1. Ensure the vehicle power mode is in ON mode, the vehicle is completely stopped, and the gear is in P position; 2. Press the information display button on the left side of the steering wheel, then select the clock vehicle settings display. At this time, you can see the vehicle option, then press the vehicle maintenance information reset to complete the process. The Honda CR-V is a compact SUV with body dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, and a wheelbase of 2661mm. It is equipped with a 2.0L 146 horsepower L4 naturally aspirated engine, paired with an ECVT continuously variable transmission, delivering a maximum power of 107 kW.
6
2
Share

Where is the child lock button on the Ford Escort?

The child lock button of the Ford Escort is located on the side of the rear door. There is a small switch below the door lock. The rotary child safety lock requires inserting a key into the corresponding hole to rotate the knob switch for locking and unlocking operations. The child safety lock is used for the rear doors of the vehicle to prevent the danger of opening the door from inside while the vehicle is in motion. When this device is activated, even if the electronic central door lock is opened, the device remains in the locked state. The Ford Escort is a compact car with a body length, width, and height of 4587mm, 1825mm, and 1490mm respectively, and a wheelbase of 2687mm.
12
5
Share

Where is the Clutch Located?

The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. The clutch is a common component in mechanical transmission systems, allowing the drivetrain to be disconnected or engaged at any time. Its basic requirements include smooth engagement, quick and thorough disengagement, ease of adjustment and repair, compact size, lightweight, good wear resistance, sufficient heat dissipation capacity, and effortless operation. Commonly, clutches are divided into two types: jaw clutches and friction clutches.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.