How to Remove the Rear Bumper of a Malibu?
2 Answers
The method for removing the rear bumper of a Malibu mainly involves the following steps: Step 1: Remove the fixing screws; Step 2: Pull the bumper backward and upward as a whole; Step 3: Remove the rear bumper bolts from the left and right sides. Additional information: 1. The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear parts of the vehicle body. 2. The Malibu is a mid-size car with the following body dimensions: length 4855mm, width 1854mm, height 1476mm, wheelbase 2737mm, front track 1585mm, rear track 1587mm, minimum ground clearance 118mm, fuel tank capacity 61L, and trunk capacity 544L.
I've removed the rear bumper of my Malibu several times myself, and this job requires patience. First, make sure the car is securely parked on level ground or supported by jack stands—safety comes first. The tools are simple: prepare a Phillips screwdriver, a pry bar, and gloves to prevent scratches. Step one is to crouch down and check the inner wheel arch, where there are usually several black plastic clips or screws. Use the screwdriver to remove them or carefully pry them open with the pry bar to avoid cracking. Next, move to the lower rear of the car, peel back the fender liner, and locate the hidden bolts (about three or four points) to loosen them. Once everything is loose, gently pull the bumper outward from the rear, being careful not to yank it forcefully to avoid damaging the reverse light wiring or sensor connectors inside—disconnect any aftermarket wiring first if modified. The whole process took me about half an hour, though beginners might need more time. Check all clips for integrity before installing new parts or reassembling the original. This method is quite practical and can save on repair costs.
