How to Remove the Navigation System in Honda Lingpai?

1 Answers
DelPiper
07/30/25 9:36am
There are three methods to remove and install the navigation system in Honda Lingpai: 1. The first step is disassembly—remove the button panel on the center console and the air conditioning vents. 2. After removing the panel and gently disconnecting the wiring, loosen the relevant screws, take out the single-disc CD player, and unplug its wiring. 3. Use screws and clips to install the new navigation device in the original position of the center console panel. Additional information: There are two types of Lingpai navigation upgrades: 1. OEM upgrade: The Jingneng Lingpai original screen upgrade navigation enhances functionality based on the original screen, without altering the car's appearance, damaging the original wiring, or affecting the 4S warranty. It is the best upgrade method for Honda Lingpai. 2. Destructive upgrade: DVD navigation (requires discarding the original screen).
Was this review help?
5
2
Share
More Forum Discussions

What is the method for right reverse parking using only the left rearview mirror?

Here is an introduction to the method for right reverse parking using only the left rearview mirror: 1. Method 1: When the lower edge of the left rearview mirror covers the parking dotted line, turn the steering wheel fully to the right and slowly continue reversing in a semi-clutch state. 2. Method 2: When you see the left corner of the parking space appear in the left rearview mirror, pay attention. When the left parking space line appears about two fingers' width (approximately 20 cm) in the mirror, turn the steering wheel back half a turn and continue reversing slowly. 3. Method 3: When the entire left parking space line just appears, straighten the steering wheel. At this point, make minor adjustments based on the distance between the car body and the parking space line. Steer in the direction you want the rear of the car to move, and immediately straighten the steering wheel after making the adjustment.
12
2
Share

What is the ground clearance of the BMW 5 Series?

The BMW 5 Series is equipped with a double-wishbone independent front suspension and a multi-link independent rear suspension, with a ground clearance of 149mm. Below are detailed explanations regarding the ground clearance of the BMW 5 Series: 1. Minimum Ground Clearance: The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. 2. Function: The minimum ground clearance indicates the distance between the lowest point of the vehicle (excluding the wheels) and the road surface when the vehicle is fully loaded. It reflects the vehicle's ability to overcome obstacles (such as rocks). A smaller ground clearance means a reduced ability to overcome obstacles. Sedans typically navigate flat urban roads, hence their ground clearance is smaller. Off-road vehicles have a larger minimum ground clearance to facilitate passing over larger obstacles.
15
3
Share

What are the differences between the Sylphy and the Sylphy Classic?

Here are the specific differences between the Sylphy and the Sylphy Classic: 1. Exterior: The Sylphy features polygonal wheel rims, while the Sylphy Classic has small conical protrusions on the headlights, making it easier for the driver to observe the distance to obstacles on both sides of the front. 2. Interior: The Sylphy adds a central headrest in the rear seats, and the seat belts are upgraded from two-point to three-point. 3. Powertrain: The Sylphy utilizes new technology with an ultra-low fuel consumption CVT continuously variable transmission, 1.6L 126 horsepower, and a top speed of 183 km/h. The Sylphy Classic uses a 4AT transmission, 1.6L 117 horsepower, and also has a top speed of 183 km/h.
15
4
Share

What are the steps for shifting up in a manual transmission?

Manual transmission upshifting steps include shifting up, depressing the clutch, operating the gear lever with the right hand, and releasing the clutch after shifting to a higher gear. Below is an introduction about the clutch: 1. Introduction: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Function: While driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. 3. Categories: The clutch is a common component in mechanical transmission, allowing the drivetrain to be separated or engaged at any time. Basic requirements include smooth engagement, quick and thorough separation; easy adjustment and repair; compact size; light weight; good wear resistance and sufficient heat dissipation capacity; easy and effortless operation. Commonly, they are divided into jaw-type and friction-type clutches.
2
2
Share

What do Audi 30 35 40 45 mean?

30, 35, 40, and 45 refer to G-values, which can be understood as the vehicle's acceleration performance being 30%, 35%, 40%, and 45% of gravitational acceleration (G) respectively. The higher the value, the better the car's acceleration performance. These numbers reflect the vehicle's acceleration capability - the larger the value, the higher the horsepower and the better the performance. Below is some relevant information about acceleration performance: 1. Acceleration performance refers to a vehicle's ability to rapidly increase its speed. 2. It is generally evaluated by continuous gear-shifting acceleration performance from standstill and acceleration performance in top gear or second-highest gear. 3. The testing method for starting acceleration performance involves putting the transmission in starting gear, rapidly starting with full throttle, and measuring the time (in seconds) taken to reach over 80% of maximum speed (over 100km/h for passenger cars). The shorter the starting acceleration time, the better the starting acceleration performance.
11
4
Share

How to Adjust the Headrest Up and Down on a BMW 530?

The BMW 530 belongs to the BMW 5 Series. The headrest of the BMW 5 Series has a button; pressing the button allows you to adjust it up, down, left, and right freely. Below are detailed introductions about the BMW 5 Series: 1. Overview: The domestic 5 Series is a high-end sedan. The current generation of the 5 Series was introduced in 2004. BMW's 5 Series is one of the most outstanding series in automotive history. Its peak era began with the third generation E34 (1988-1996). The current 5 Series is the third generation product of the E34. 2. Pros and Cons: The main advantages are its grand and beautiful appearance; the interior is stable, with good craftsmanship and rich configurations; spacious. The main disadvantage is the poor quality of interior materials. Some vehicles may experience oil burning issues.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.