How to Remove the Mirror Shell of Baojun 730?

[OAlina]

Steps to remove the mirror shell of Baojun 730: There is a hexagon screw fixing the connection between the rearview mirror and the base. Unscrew the screw and lift the rearview mirror along the slot to remove it. More details about the car are as follows: 1. Baojun 730 is a family MPV product under SAIC-GM-Wuling Baojun, featuring a seven-seat layout with a maximum cargo space of 1680L. The overall design adopts a style similar to the Baojun 630, with the tail lights changing from the original split design to an integrated design, featuring sharp styling and a horizontal LED light strip that is fashionable and eye-catching, giving a sense of technology. 2. The car is equipped with Continental MC5 series tires in the specification of 205/55-R16, paired with stylish silver-black aluminum alloy wheels. 3. In terms of safety, it is equipped with ESP body stability system, ABS anti-lock braking system, EBD electronic brake force distribution, TCS traction control system, HBA brake assist, HHC hill start assist, front four airbags + side curtain airbags, tire pressure monitoring, and a 360° panoramic view system.

[LeCameron]

I've removed the Baojun 730 mirror housing several times - it's pretty straightforward. The housing is typically secured with plastic clips rather than screws. You'll need a plastic pry tool or an old bank card to gently pry open the seam along the edge - start from the bottom where the clips are looser. Apply gentle pressure to avoid cracking the housing or breaking clips. If the housing is dirty or worn, this is a good chance to clean it before reinstalling. Reasons for removal? Maybe you're replacing it or fixing a loose internal mirror. Always disconnect the battery first to prevent accidental power mirror activation. Just keep a pry tool and gloves handy - five minutes per side if you're careful, saving you a trip to the shop. Don't worry if you're a beginner; it gets easier with practice.

[GeorgeLynn]

As a car owner, I can tell you that removing the side mirror cover is quite simple. The cover is held in place by clips, and all you need is a plastic pry tool. Start by gently prying from the outer edge of the car mirror, slowly releasing all the clip points. Be careful not to use metal tools that could scratch the paint or crack the plastic. Once pried open, the cover will separate to reveal the internal structure. After removal, check if the clips are intact; replace the cover if any are broken. A reminder: turn off the engine for safety before starting to avoid accidents with power mirrors. Take your time during the process, releasing one clip at a time, and it should take no more than five minutes. I recommend using a plastic pry tool—it's inexpensive and effective. After removal, check for any dirt and take the opportunity to clean the mirror surface.

[Jasper]

The removal of the Baojun 730 side mirror housing primarily relies on prying open the plastic clips. Use a plastic tool to gently pry from the edge, proceeding slowly to avoid damaging the housing. Ensure the vehicle is turned off for safety before operation to reduce the risk of electric shock. Once the housing is removed, the mirror section is exposed, facilitating cleaning or part replacement. The entire process is quick and safe, with attention to personal protection.