···
Log in / Register

How to Remove the Maintenance Reminder on Volkswagen?

3 Answers
ArthurRose
07/29/25 8:18pm
To remove the maintenance reminder on a Volkswagen, follow these steps: 1. After turning off the car, press and hold the set button on the right side of the dashboard. 2. Turn on the ignition, release the set button, and then press it again to cancel the reminder. Below is some related information: Taking the 2021 Volkswagen Lavida Comfort Edition as an example, it is a compact 4-door, 5-seater sedan with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The 2021 Volkswagen Lavida Comfort Edition is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
2
5
Share
Nguyen
08/14/25 4:48pm
As a Volkswagen owner, I often encounter that annoying maintenance reminder light. When it comes on, I usually try the simple button reset method first: turn off the engine, press and hold the '0.0' or 'Trip' button on the dashboard, then turn the key to the 'on' position (without starting the engine), and wait a few seconds until the reminder message disappears before releasing the button. This trick works for most Volkswagen models like the Golf or Jetta. If it doesn't work, it might be because the reset wasn't done properly after the last maintenance. I'd check the manual or look up specific instructions for my model online. Additionally, regular maintenance is key—this reminder is meant to alert you to things like oil changes, so don't just turn it off casually, as it could affect engine longevity. Safety first, I make sure the car is quiet when performing this operation to avoid accidentally triggering other systems. If all else fails, I take it to the dealership to have it checked with a professional diagnostic tool.
Was this review help?
10
3
Share
Expand All
ValentinaLynn
10/16/25 3:38am
When I first drove my Volkswagen Passat, the maintenance reminder on the dashboard gave me a headache. Through trial and error, I found a common method: turn off the engine, find an assistant or do it yourself, press and hold the reset button near the center console without releasing, then gently turn the key to the power-on position (without starting the engine), and wait for the reminder to flash and disappear before letting go. If that doesn’t work, I’ve tried disconnecting the battery for a few minutes to reset the entire system—simple and crude but effective. A reminder: this alert is designed for the car’s health, and ignoring it may damage the engine, but if it keeps lighting up prematurely, it’s worth resetting. As an owner, I recommend checking the owner’s manual first for detailed procedures, as different models vary greatly—don’t experiment randomly to avoid damaging the circuits.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

At what tread depth should tires be replaced?

Tires should be replaced when the tread depth is less than 2.5mm. A tread depth standard greater than 3.5mm is considered good condition, while between 2.5mm and 3.5mm is normal. When it reaches the minimum limit of 1.6mm, replacement is mandatory. Key considerations for tire replacement include: 1. Selecting tires of the same specification; 2. Replacing the valve stem simultaneously; 3. Paying attention to installation direction and inflation; 4. Checking tire pressure; 5. Performing a four-wheel alignment after replacement. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to enable vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving to prevent severe vibrations from damaging automotive components.
16
5
Share

Is a Lighter Prone to Explode in a Car?

Lighters are prone to explode in cars. The reason for this is: lighters contain pressurized gas. If placed on the dashboard or instrument panel where they are exposed to direct sunlight, the gas inside the lighter will continuously expand after prolonged exposure to heat. Upon reaching a critical point, an explosion can occur, which may cause severe damage to the vehicle. The main component of lighters is liquid butane, which is highly flammable and explosive. At normal room temperature of 20°C, it can explode. When a lighter is placed in an environment exceeding 55°C, its volume will expand. It is recommended that drivers who have the habit of smoking while driving should remember to take their lighters with them when exiting the vehicle to avoid potential hazards.
10
2
Share

How to Turn Off the Auto Start-Stop Function on a Cadillac XT5?

To turn off the auto start-stop function on a Cadillac XT5, simply press the auto start-stop switch. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. Taking the 2021 Cadillac XT5 as an example, its body dimensions are: length 4813mm, width 1903mm, height 1682mm, with a wheelbase of 2857mm. The 2021 Cadillac XT5 features a MacPherson strut front suspension and a five-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power of 174kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
8
3
Share

Can a car battery be charged directly in the vehicle when it's dead?

When a car battery is dead, it can be charged directly in the vehicle. During engine startup, the starter draws a significant current, which a regular charger cannot supply. If the battery is completely dead, the car won't start. However, if the engine can be started, the alternator will then charge the battery. The functions of a car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system during engine startup; 2. Supplying power to vehicle electrical equipment when the engine is off or idling at low speed; 3. Assisting in powering electrical devices when the alternator's output is insufficient; 4. Absorbing voltage spikes in the electrical system to protect electronic components; 5. Storing excess electricity generated by the alternator.
5
3
Share

What are the two common cooling methods for engines?

Engines generally have two cooling methods: air cooling and water cooling. Air cooling involves numerous cooling fins on the engine block to increase the contact area with air; water cooling utilizes a cooling system where coolant continuously circulates within the engine to dissipate heat. The main components of an engine include: 1. Valve train; 2. Crankshaft connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing gas expansion that drives the piston to perform work.
17
1
Share

Can the original license plate be retained after a car transfer?

Whether the original license plate can be retained after a car transfer depends on different circumstances: 1. If both parties involved in the vehicle transfer are spouses, the original license plate can be retained; 2. If not, the license plate cannot be used on the original vehicle when the vehicle is sold and transferred normally. In this case, a new vehicle license plate must be selected during the transfer process. A vehicle license plate, also known as a car number plate and vehicle driving license, is a hard-coded plate with a unified format and style as stipulated by national vehicle management regulations. It is issued by the vehicle management authority after reviewing, inspecting, and registering the vehicle that has applied for the license plate, and it bears the registration code.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.