···
Log in / Register

How to Remove the Maintenance Reminder on the CS75?

4 Answers
Manuel
07/30/25 2:09am
To turn off the maintenance reminder on the CS75, follow these steps: 1. First, turn the car key to the ON position (two turns for a traditional key or two presses for a push-button start). 2. Then, press the selection button on the steering wheel. 3. Next, press and hold the reset button for about 5 seconds (do not release the reset button). 4. Turn off the power, keeping the reset button pressed, then turn the power back on to clear the maintenance reminder. As the vehicle's mileage increases, internal components will gradually wear out. To ensure the car operates properly, manufacturers have installed reminder indicators that alert the owner to replace parts after a certain mileage. After successful replacement, the maintenance light must also be reset.
Was this review help?
5
1
Share
JaxsonRose
08/15/25 8:10am
Hey, when it comes to turning off the maintenance reminder light on the CS75, I've encountered it quite often with my own car, and the method is pretty straightforward. Usually, you start by parking the car securely, turning off the engine, inserting the key into the ignition, and turning it to the ON position without starting the engine. Then, locate the trip reset button on the dashboard, press and hold it, and watch for the little wrench icon—it will flash a few times before disappearing, at which point you can release the button. The whole process takes about 10 to 15 seconds, so don’t rush. Afterward, start the car to check if the light is off. Just a friendly reminder: this alert is there to remind you of regular maintenance, so don’t just focus on turning it off. Otherwise, you might run into issues like engine wear and tear. When it’s time for maintenance, follow the manual and take the car to the shop for an oil change and brake inspection—safety and durability should always come first.
Was this review help?
7
0
Share
Expand All
StEsther
10/21/25 4:37am
To remove the maintenance reminder light on the CS75, the common method is to insert the key into the ignition without starting the engine, just turning it to the 'ON' position. Once the dashboard lights up, press and hold the ODO or RESET button until the reminder light turns off. I must say, although this light can be annoying, it genuinely helps prevent costly major repairs. It's best to visit a professional shop for a vehicle inspection after resetting, and have the air filter cleaned or replaced to ensure everything is in good condition. I've seen some owners who only reset the light without proper maintenance, and ended up with engine failure – now that's real trouble.
Was this review help?
17
0
Share
Expand All
McEvelyn
12/04/25 5:05am
To remove the maintenance reminder for the CS75, you can reset the system. With the engine off, turn the key to the ON position to power up, then press and hold the button on the instrument panel for about 10 seconds until the light disappears naturally. This resets the mileage counter, but it doesn't mean the car has actually been serviced. The reminder light is a protective mechanism; address it promptly when it lights up.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What are the reasons for the soft brake feeling in the Sagitar that makes it seem like it can't stop?

The brake, as a critical component of safe driving, should be given special attention by every driver. Before each drive, you can test the working condition of the brake pedal. Before starting the engine, the brake pedal will be very hard; after the engine is normally started, the brake pedal will sink slightly. The reasons for a soft brake feeling include the following: 1. Mixed brake fluid: Using different brands of brake fluid together can reduce braking performance. 2. Air in the brake fluid: The presence of air in the brake fluid that has not been bled out. 3. Oil leakage or poor sealing: Oil leakage in the master cylinder or wheel cylinders, or poor sealing. 4. Damaged outer packaging: Damage to the external casing of the brake lines.
6
3
Share

What is the difference between GL8 652 and 653?

The differences between GL8 652 and 653 are: 1. Different fuel tank capacity: GL8 652 has a fuel tank capacity of 66L; GL8 653 has a fuel tank capacity of 70L. 2. Different trunk volume: GL8 652 has a trunk volume of 475 to 1605L; GL8 653 has a trunk volume of 521 to 1650L. 3. Different dimensions: GL8 652 measures 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm; GL8 653 measures 5219mm in length, 1878mm in width, and 1799mm in height, with a wheelbase of 3088mm.
10
0
Share

Will you fail immediately if you don't use the turn signal in Subject 3?

It results in point deduction. Below are the relevant details about Subject 3: 1. Point deduction: Failing to use or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a 10-point deduction. 2. Full score: The full score for the Subject 3 road driving skills and safe civilized driving knowledge test is 100 points each, and a score of 90 or above is considered passing. 3. Evaluation method: The Subject 3 intelligent examination system adopts a combination of automatic and manual evaluation to assess 16 basic test items, including preparation before getting in the car, starting, driving straight, changing lanes, passing intersections, passing crosswalks, school zones, passing bus stops, meeting oncoming vehicles, overtaking, pulling over, making U-turns, and night driving.
5
0
Share

What does GL825s mean?

GL825s refers to the Buick GL8 model equipped with a 2.5T naturally aspirated engine. Here are the specific details about the Buick GL8: 1. Vehicle Positioning: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. 2. Powertrain: This vehicle is equipped with a 2.0T SIDI direct-injection turbocharged engine, which delivers a maximum power of 191 kW and a maximum torque of 350 Nm. In terms of the transmission system, the engine is paired with a 6-speed automatic manual transmission. During operation, the engine can output its maximum power at 5400 rpm and its maximum torque between 2000-5000 rpm.
18
4
Share

Where is the air conditioning filter of Dongfeng Fengxing S500 located?

The air conditioning filter of Dongfeng Fengxing S500 is located inside the glove box in front of the passenger seat. The replacement method is as follows: 1. Open the glove box on the passenger side; 2. Press the buckle on the right side of the glove box; 3. Remove the glove box and the cover of the air conditioning filter; 4. Pull out the old air conditioning filter for replacement. The Dongfeng Fengxing S500 is an MPV with the following body dimensions: length 4620mm, width 1810mm, height 1720mm, wheelbase 2750mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 88kW and a maximum power speed of 6000rpm.
3
3
Share

What to Do When Car Headlight Covers Turn Yellow?

Methods for dealing with yellowed car headlight covers: 1. Wipe with a soft cloth: Whether cleaning the car or the headlight covers, always use a soft cloth to avoid scratching the paint or the covers. 2. Regular cleaning: You can gently wipe the covers with soapy water or cleaning wax using a soft cloth to remove stains. Soapy water is mild and non-corrosive, so it won’t harm the headlights. Alternatively, using a professional car cleaner is even better, as it not only removes dirt but also makes the headlights less prone to dust accumulation. 3. Polish and maintain: First, apply a polishing compound, then use a soft cloth to apply protective wax (car wax). This will not only enhance the gloss and brightness of the headlights but also protect the car’s paint.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.