How to Remove the Maintenance Reminder on the Changan CS75?

What is the small round hole on the rear bumper?

The small round hole on the rear bumper is a towing eye, used for towing. Here is some relevant information about bumpers: 1. Component Function: The car bumper (also known as an impact beam) is located in most areas at the front and rear of the vehicle. It is designed to prevent external damage from affecting the vehicle's safety systems and has the capability to reduce injuries to passengers during high-speed collisions. Nowadays, more and more bumpers are designed for pedestrian protection. 2. Origin and Definition: The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the vehicle body. Twenty years ago, the front and rear bumpers of cars were mainly made of metal materials, using steel plates with a thickness of more than 3 millimeters pressed into U-shaped channel steel, with chrome-plated surfaces. They were riveted or welded to the longitudinal beams of the frame, with a relatively large gap between the bumper and the body, making it seem like an additional component.

6

0

Share

What are the steps to turn on the air conditioning in the Mistra?

The steps to turn on the air conditioning in the Mistra are: 1. Start the vehicle and turn on the external circulation for about 5 minutes before turning it off; 2. Press the AC button after turning on the air conditioning switch; 3. If it is an automatic air conditioning system, adjust the temperature directly; if it is a manual one, turn the knob to the cooling position; 4. Turn on the internal circulation. The Mistra is a mid-size sedan under Beijing Hyundai. Taking the Mistra 2021 270TGDi DCT LUX Premium Edition as an example, its dimensions are 4780mm in length, 1815mm in width, and 1460mm in height, with a wheelbase of 2770mm. It is a 4-door, 5-seater sedan. The 2021 270TGDi DCT LUX Premium Edition is powered by a 1.5L inline 4-cylinder turbocharged engine, with a maximum power of 125kW and a maximum torque of 253Nm, paired with a 7-speed dual-clutch transmission.

17

3

Share

How to Align the Wiper Blade with the Edge Line?

Methods for aligning the wiper blade with the edge line: When the highest point of the wiper blade coincides with the right edge line, you can slightly adjust the direction to straighten the car body. However, this position may not be accurate for everyone due to differences in height. The wiper blade is a strip-like structure installed in front of the windshield, consisting of components such as an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its primary function is to clear rain, snow, and dust from the windshield that obstruct the view. The power source of the wiper blade comes from the electric motor, which is the core of the entire wiper system. It typically uses a DC permanent magnet motor. The wiper motor installed on the front windshield is usually integrated with the worm gear mechanical part. The worm gear mechanism serves to reduce speed and increase torque, with its output shaft driving the four-bar linkage. The four-bar linkage converts continuous rotational motion into a left-right oscillating motion.

19

5

Share

How to reset the tire pressure on GS8?

There are 5 steps to reset the tire pressure on GS8: 1. Start the GAC Trumpchi GS8 vehicle, then press the vehicle information button. 2. Select the tire settings in the vehicle settings options of the GAC Trumpchi GS8. 3. Press the "SET" button on the GAC Trumpchi GS8 vehicle to enter further settings. 4. Click confirm. 5. After the "Tire Pressure Monitoring Initialization" of the GAC Trumpchi GS8 vehicle is completed, the tire pressure warning will be eliminated. Below is some related information about the tire pressure indicator: 1. The indicator light is a warning method for the owner based on tire pressure and other issues. When encountering uneven roads during driving, the tire pressure changes due to different forces, and the indicator light will turn on. 2. If the tire pressure light is not on, you should check whether the tire pressure monitor is functioning properly before driving. If the tire pressure monitor does not issue an alarm promptly when there is an issue with the vehicle, it indicates a problem with the tire pressure monitor.

4

3

Share

Are the tires at 4S stores all original factory tires?

Since the parts replaced at 4S stores need to be covered by warranty, the tires at 4S stores are original factory tires. Using original factory tires can to some extent enhance the assurance of structure and performance. The parts used by 4S stores are directly provided by the manufacturer. If you go to an authorized 4S store for replacement, the tires will be the same as the original ones on the car, with no difference. During replacement, you can check the part number to verify if it is an original factory part. Advantages of using original factory tires: High compatibility with the vehicle: The original tires (parts) designed specifically for each model can ensure the same technical condition and quality as the new car parts, protecting the vehicle's premium performance. Quality assurance: Every original tire (part) used by 4S stores is quality-certified by the automaker, ensuring reliable operation. Long warranty period: For genuine parts replaced at the user's expense, replaced for free, or replaced free of charge due to recall repairs outside the vehicle warranty period (excluding wear parts specified in the home vehicle three-guarantee certificate), the quality warranty period is 1 year or 20,000 kilometers. Whichever comes first, time or mileage, applies.

8

5

Share

Can unconfirmed license plate numbers be selected again after expiration?

Unconfirmed license plate numbers cannot be selected again after expiration. If a pre-selected license plate number on the 12123 Traffic Management APP is not confirmed within the deadline, the number will be returned to the random number pool within 90-120 days after expiration. Generally, pre-selected license plates on the APP are reserved for 15 working days starting from the next day. If not confirmed within 15 working days, the selected license plate will be considered as unconfirmed after expiration, and the penalty is being barred from online license plate selection for two years. Below are the precautions for selecting license plates: Each motor vehicle can have a total of 20 self-edited license plates and 5 random selections. The pre-selection of license plates includes two stages: the basic information entry stage, which users can complete at any time, and the pre-selection stage, which operates from 09:00 to 21:00 daily. New vehicle registration, used vehicle transfer, and used vehicle import pre-selection services support both self-editing and random selection methods, while new energy vehicle license plate replacement pre-selection services only support random selection.

17

5

Share

How to Remove the Maintenance Reminder on the Changan CS75?

What is the small round hole on the rear bumper?

What are the steps to turn on the air conditioning in the Mistra?

How to Align the Wiper Blade with the Edge Line?

How to reset the tire pressure on GS8?

Are the tires at 4S stores all original factory tires?

Can unconfirmed license plate numbers be selected again after expiration?

Where is the Bluetooth in the 2015 Audi Q3?

Can the original engine number be stamped on a new engine?

What kind of water should be added to the windshield wiper?

Where is the engine number of the Lynk & Co 03 located?