How to Remove the Maintenance Reminder on the Car Dashboard?

1 Answers
Doris
07/30/25 6:43am
There are two methods to cancel the car dashboard maintenance reminder light: 1. Visit a 4S dealership to use specialized diagnostic tools for clearance. 2. Utilize the manual reset function via the buttons on the right side of the dashboard. Detailed steps for manual reset are as follows: 1. Turn off the ignition switch. 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch. 3. Release both arrow buttons after approximately 3 seconds. 4. The maintenance menu will appear, asking if you want to reset. 5. Press and hold the SET (reset) button for more than 3 seconds. 6. Press the MODE button. 7. Turn off the ignition switch to complete the reset. The original purpose of the maintenance light is to remind the car owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S dealership for maintenance. After the maintenance is completed, the dealership will use a fault diagnostic tool to reset the maintenance light for the vehicle.
Was this review help?
19
0
Share
More Forum Discussions

Where is the Chevrolet window switch located?

The one-touch window control buttons for Chevrolet are located on the driver's door armrest. Here is some relevant information about Chevrolet: 1. Development History: Chevrolet automobiles are like a mirror reflecting American history and culture. Mentioning Chevrolet is akin to mentioning NBA or Hollywood - names deeply intertwined with the United States. From its inception in 1909 to the present day, it has traversed over 100 years of history, boasting a proud heritage and tradition that continues to this day. 2. Brand Positioning: Chevrolet is an automotive brand under General Motors Company, founded on November 3, 1911, by William C. Durant and Louis Chevrolet.
17
3
Share

How to Determine Timing Chain Skipping Teeth?

Skipping teeth phenomenon: Due to overload or improper design and manufacturing, the phenomenon where the flexible gear teeth slip out of the rigid gear teeth during meshing. Below is relevant information: 1. Skipping teeth phenomenon: During the use of the toothed belt, its tension will decrease due to wear. If the tension of the toothed belt is not adjusted in time, the toothed belt skipping teeth phenomenon will occur. Therefore, to ensure the normal operation of the engine, the tension of the toothed belt should be checked and adjusted regularly. The interval for inspection and adjustment should be determined based on the road conditions and climate conditions the vehicle is driven in. 2. Function: The main function of the engine timing belt is to drive the engine's valve train, ensuring that the engine's intake and exhaust valves open or close at the appropriate time to guarantee normal air intake and exhaust in the engine cylinders. In some models, such as the Volkswagen Jetta (EFI), Santana 2000, Bora, Audi, etc., the timing belt also takes on the task of driving the water pump.
20
5
Share

Why is the AC light not working?

If the AC light in your car's air conditioning system is not working, it could be due to a faulty AC switch or a blown AC power supply fuse. Here is some relevant information about car air conditioning: 1. Introduction: The car air conditioning system, commonly referred to as car AC. 2. Function: It is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to provide a comfortable environment for passengers, reducing travel fatigue. It also creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving as part of the ventilation system. 3. Components: Generally includes a refrigeration unit, heating unit, and ventilation system. This integrated system makes efficient use of the limited space inside the car, featuring a simple structure and ease of operation, making it a popular modern car air conditioning system internationally.
18
5
Share

Can the motorcycle license plate number be changed?

Motorcycle license plate numbers can be changed through the vehicle transfer process. Used vehicle transfer: Go to the vehicle management office to process the used vehicle transfer. During the transfer, you can request to retain the license plate, but the old plate must be surrendered first. You need to specify the date for retaining the license plate. After getting the new vehicle: Go to the vehicle management office to collect the old license plate (ID card and new vehicle license required). First, pay the license plate production fee, then inform the staff of the date for retaining the license plate to receive the old plate. Owners who retain their license plates are not issued temporary plates. Before the new metal plate is issued, the old plate must be displayed. After 15 working days, go to collect the new metal plate.
16
4
Share

How to Turn Off the Rear Window Wiper?

The wiper has three gear positions, and pushing it to the middle position will turn it off. Below is relevant information about the wiper: 1. Rear Wiper Position: Rear wipers are mostly equipped on SUVs, MPVs, hatchbacks, and some liftback vehicles. 2. Pre-installation Considerations: Before installation, the impact of high-speed airflow must be considered. Sedans have a slanted rear window, resulting in fast wind speed during driving, which not only hinders movement but also significantly affects the wiper's performance. Hatchbacks, with their almost vertical rear windows, experience slower wind speeds and minimal impact, making them suitable for installation. 3. Precautions for Using Car Wipers: (1) Preventing Aging: When a vehicle is exposed to the scorching sun in summer, the surface temperature of the glass can rise above 60°C. The rubber blade of the wiper, pressed against the glass for extended periods, is prone to deformation and high-temperature aging, greatly reducing the wiper blade's lifespan. Therefore, it is recommended to park the vehicle in a shaded area during summer, which not only delays the aging of the wiper blade rubber but also reduces damage to the car paint from high temperatures and UV rays. (2) High-Speed Driving: In summer, there are many insects, and after high-speed driving, the windshield may be covered with insect remains. Due to the high speed, these remains quickly dry and harden. Using the wiper to clean them at this time may not only fail to clean effectively but also cut and damage the wiper blade. Users should exercise caution when using the wiper in such situations.
13
2
Share

What type of oil is used for the Changan CX70t?

The original oil specification for the Changan CX70 is SL-grade 5W-30 oil. Any oil that meets this specification can be used. Oil grades are typically classified by viscosity and oil quality. The details are as follows: SAE Viscosity Classification: High-temperature oils for summer use include 20, 30, 40, and 50. The higher the number, the greater the viscosity, and the higher the maximum applicable temperature. Low-temperature oils for winter use include 0W, 5W, 10W, 15W, 20W, and 25W. The symbol 'W' stands for Winter, and the smaller the number before 'W,' the lower the low-temperature viscosity and better the low-temperature fluidity, meaning it is suitable for lower minimum temperatures. All-season oils include 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, and 10W-50. The smaller the number before 'W,' the lower the minimum applicable temperature, and the larger the number after the hyphen, the higher the maximum applicable temperature. API Engine Oil Quality Classification: Oils starting with 'S' (SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN) are gasoline engine oils. The letters range from A to N, with each subsequent letter representing a higher grade than the previous one. For example, SN is a higher grade than SM. Oils starting with 'C' (CA, CB, CC, CD, CE, CF) are diesel engine oils. The letter grading is similar to the 'S' category, with later letters indicating higher oil grades.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.