How to Remove the Maintenance Reminder in Magotan?

2 Answers
IrisMarie
07/24/25 9:34am
To cancel the maintenance reminder in Magotan, hold down the right button on the dashboard, insert the key, release the right button, and when the "Clear Maintenance Cycle" menu appears, enter the maintenance interface to restore default values. Here is some related information about the Magotan: 1. Model: The Magotan is a mid-size sedan introduced by FAW-Volkswagen, with dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, and a wheelbase of 2871mm. 2. Engine: The Magotan is equipped with 1.4T and 2.0T turbocharged engines, with maximum power outputs of 110kw and 137kw respectively, paired with a 7-speed dual-clutch transmission.
Was this review help?
13
0
Share
DeCassandra
08/11/25 4:51am
I just cleared the service reminder on my Magotan, and the steps were super simple: First, turn the key to the ignition position (don't start the engine), then hold down the 0.0 button on the right side of the instrument panel. Next, turn off the power and turn it back on. At this point, the dashboard will display an English message asking if you want to reset—immediately release the button, then quickly press the confirmation button on the left side of the steering wheel. The whole process takes less than half a minute, but there's a small catch—it only works when the engine is off. I spent a while fiddling with it while the seatbelt was plugged in and got no response, only to realize later that it had to be done while parked. After finishing, make sure to double-check that the wrench icon has disappeared to confirm success!
Was this review help?
14
2
Share
Expand All
More Forum Discussions

Will There Be Residue When Applying TPU Film to the Dashboard?

Whether there will be adhesive residue when applying TPU film to the dashboard is influenced by multiple factors. The main factors include the quality of the film, the technique used during application, the cleanliness and material of the screen, and the duration of the film's application. These factors can vary significantly in real-world use, making adhesive residue unavoidable. Below is relevant information about applying film to car dashboards: 1. Impact on Use: Over time, the film may leave marks on the dashboard surface, affecting the normal viewing and use of the dashboard, while also compromising the car's aesthetics and reducing the driver's experience. 2. Adhesive Residue: Poor-quality film can lead to severe adhesive residue on the dashboard, which is difficult to clean. 3. Damage to the Dashboard: If the adhesive of the dashboard film is too strong, removing the film may inevitably cause damage to the dashboard screen.
14
0
Share

Is the Fuel Tank Vent Valve the Same as the Charcoal Canister Solenoid?

The fuel tank vent valve is not the same as the charcoal canister solenoid. Here is an introduction to the charcoal canister: 1. Overview: The charcoal canister is typically installed between the fuel tank and the engine. Since gasoline is a volatile liquid, the fuel tank often contains vapor at normal temperatures. The function of the fuel evaporation emission control system is to direct these vapors into the combustion process and prevent them from escaping into the atmosphere. 2. Operation Process: Due to the adsorption properties of activated carbon, when the car is running or turned off, gasoline vapors from the fuel tank enter the upper part of the charcoal canister through piping, while fresh air enters from the lower part of the canister. 3. Principle: The charcoal canister is actually part of the Evaporative Emission Control System (EVAP), which is designed to prevent fuel vapors from escaping into the atmosphere after the engine is turned off.
16
0
Share

How to use the tire pressure reset button on the WEY VV5?

vv5 tire pressure reset tutorial is: Press the black button on the dashboard, turn the ignition key three times from off to the second position without starting the vehicle. What to do if the tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal tire pressure and reset the tire pressure system. If inspection reveals a puncture in the car's tire, drive to a repair shop promptly to have the tire patched, then reinflate it. If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel hub. It is recommended to check the wheel hub and replace it if necessary. The working principle of the tire pressure monitoring system is: It uses pressure sensors installed inside the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to the central receiver module.
15
2
Share

Which button is the trunk button in the car?

The trunk button is located below the driver's side door, in the middle of the trunk, and on the car key. Trunk maintenance methods: When the plush part of the trunk gets dirty, clean it promptly. Do not wash it directly with water; use multi-function foam for cleaning, followed by odor treatment. Install a trunk mat to prevent dirt or liquids from entering and corroding the trunk surface. You can place cargo separation bags to prevent items from sliding inside the trunk, reducing the risk of contamination or damage. Reasons why the trunk won't open: Issues with the linkage rod or lock cylinder; not unlocked; mechanical component failure. Most cars require holding down the trunk open button on the remote key to open the trunk lid. Pressing the trunk open button just once will not open it. When using the car normally, always ensure there are no obstacles behind before opening the trunk lid, especially for SUV models. If there are obstacles, opening the trunk may cause the lid to hit them.
14
5
Share

Why Can't the Car Start Even with Battery Power?

Here are the reasons why a car has power but cannot start: 1. The gear was not returned to P (Park) position when parking. 2. The car key cannot be turned after insertion, preventing the vehicle from starting, and the steering wheel is locked. This situation occurs when the steering wheel is turned after parking, turning off the engine, and removing the key, causing the steering lock and steering column to engage, thereby locking the steering wheel. At this point, it can no longer be turned, serving as an anti-theft feature. 3. The throttle, controller, wiring, or motor fails to start; a depleted or faulty battery also prevents starting. (1) If the brake lights are functioning normally, it indicates the brake lever is not faulty, so brake power cutoff need not be considered. (2) If connecting the two wires of the throttle can start the car, then the controller is functioning properly.
9
4
Share

What is the reason for the thermostat not opening?

The reasons why the thermostat does not open: The thermostat cannot open after being damaged, which is the most common and severe situation; The water temperature is too low, and the thermostat cannot open because the temperature does not reach the opening threshold, which is also relatively common; Prolonged disuse leading to rust and adhesion, which is less common. Below are the relevant details: 1. The function of the thermostat: It automatically adjusts the amount of water entering the radiator based on the coolant temperature, altering the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range; 2. Maintenance status: The thermostat must maintain good technical condition, otherwise it will severely affect the normal operation of the engine. For example, if the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine's warm-up time, resulting in the engine temperature being too low.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.