How to Remove the Large Screw on the Rear Driveshaft of a BMW X5?

1 Answers
StMorgan
07/30/25 4:38am
BMW x5 rear driveshaft large screw removal method is: 1. Unscrew the fixing screws of the silencer cover plate; 2. Remove the silencer cover plate; 3. Unscrew the screws fixing the silencer; 4. The silencer can then be removed; 5. Unscrew the screws fixing the rear differential driveshaft. The BMW X5 has a length, width, and height of 4930mm, 2004mm, and 1776mm respectively, with a wheelbase of 2975mm and a fuel tank capacity of 83 liters. This car is equipped with a 2.0t turbocharged engine and a 3.0t turbocharged engine, matched with an 8-speed automatic transmission. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
11
4
Share
More Forum Discussions

How to Engage the Reverse Gear?

You can lightly press the accelerator to reach the shifting RPM and then release the accelerator. For automatic transmission vehicles, the N (Neutral) gear is used for short-term parking. The vehicle must come to a complete stop before engaging the P (Park) gear.
16
4
Share

What is the best solution for motorcycle rear wheel lock-up?

After the rear wheel locks up, try moving forward and backward about three times. Avoid repeatedly forcing the tire back and forth, as this can cause severe tire wear. Pour 100°C boiling water onto the brake pad area, then frequently move forward and backward about three times. If the brake pads and brake drum expand due to heat, they may automatically separate.
5
2
Share

How to Apply for New Energy Vehicle Tax Exemption Online?

Log in to the Electronic Tax Bureau and click the login button in the upper right corner, then select "Natural Person Login." Click on user registration and choose a real-name authentication method. There are three options available. After registration is completed, select vehicle purchase tax under the tax handling section to enter the declaration process.
6
3
Share

How to Fix Poor Contact in Motorcycle Lock Cylinder?

You can disassemble it to check the contact condition of the terminals. Some new motorcycles have excessive grease applied to the ignition switch, which may also affect the contact. Address this issue based on the specific situation. When the key is turned on, the circuit is connected; when the key is turned off, the circuit is disconnected. The ignition switch is a rotary switch.
17
3
Share

How to Replace the Windshield Lower Deflector?

Remove the mounting screws and clips, but if the deflector cannot be lifted from both sides by hand and seems stuck, preventing separation from the glass, avoid forcing it. The connection to the windshield features a slot structure. Release the fixing points on both sides, then gently pull it up from one side.
15
0
Share

How to Repair a Leaking Diesel Fuel Tank While It's Still Full?

If you find a fuel tank leak, you can clean the leaking area and apply soap or chewing gum to temporarily seal the leak. When a fuel pipe is cracked, clean it thoroughly, apply soap, wrap the cracked area with cloth strips or adhesive tape, secure it tightly with wire, and then apply another layer of soap.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.