How to Remove the Interior Rearview Mirror of BYD?

[VanLucas]

The method to remove the interior rearview mirror of BYD is: pinch the cylinder behind the rearview mirror and rotate it counterclockwise by 45 degrees to detach it. The functions of the interior rearview mirror include: 1. Observing the road conditions behind; 2. Checking the rearview mirror during emergency braking; 3. Judging the distance from the vehicle behind; 4. Observing rear passengers. Taking the BYD S6 as an example, it is a mid-size SUV with body dimensions of: length 4810 mm, width 1855 mm, height 1680 mm, wheelbase 2720 mm, and a fuel tank capacity of 72 liters. The BYD S6 is equipped with a 1.5L turbocharged engine, with a maximum power of 113 kW and a maximum power speed of 5200 rpm.

[VonDeclan]

I found that removing the BYD interior rearview mirror isn't actually difficult, but you need to take it slow to avoid damaging the windshield. First, check the connection point at the base of the mirror—usually a mounting base secured with small screws. You'll need a small Phillips screwdriver to gently loosen the screws, then carefully lift the mirror upwards with your hands. Don't use too much force during removal—the glass is thin, and I nearly cracked it last time, but luckily nothing happened. After finishing, remember to clean any leftover adhesive residue. If you're replacing the mirror or installing a dashcam, it's best to look up a tutorial for your specific car model online. Before starting, turn off the engine and wear gloves to protect your hands. DIY removal can save money, but if you're not familiar with the tools, it's safer to visit a professional shop.

[Alessandra]

I've taken apart the rearview mirror in my own BYD, and found it quite straightforward. First, prepare a small screwdriver and a soft cloth, then inspect the base structure: most BYDs use screws for fixing, and once unscrewed, the mirror loosens. Be gentle during removal to avoid scratching the glass—I like to photograph each step for easier reassembly. If the mirror is connected to the vehicle's system by wires, be careful not to pull them too hard to prevent short circuits. After completion, clean everything up, and replacing with new equipment becomes much quicker. Don't be afraid of the hassle; you'll learn the tricks after doing it once. I recommend beginners start practicing with simpler car models—safety first.

[SaraFitz]

When removing the BYD interior rearview mirror, I'm always concerned about the risks, as the glass is fragile and could cause accidents. It's best to consult a professional mechanic, as they have specialized tools to avoid damage. If you insist on doing it yourself, first use a small tool to check the type of base screws, unscrew them, and then slowly lift the mirror away. Ensure the car is parked and the engine is off during the entire operation, and wear protective gloves. Don’t forget to clean any residue to avoid obstructing your view. Safety is the top priority—it’s not worth taking risks.

[HarmonyLynn]

The removal process is simple: Use a small screwdriver to locate the screw hole at the bottom of the mirror, then gently twist to remove the screw. If there are no screws, it might be a clip-on design—try pushing the mirror upward to loosen it. Apply gentle force during operation and avoid pulling hard. After completion, clean any residual adhesive or dust from the windshield. It's recommended to practice on a scrap car first if you're unfamiliar with the process.

[LeWillow]

I'm curious why you'd need to remove the interior rearview mirror—most people just replace the mirror or install a dashcam. BYD's mounts typically use screw fastening; observe the mount details first before removal, then use small tools to loosen the screws before separating. Note that structural changes may vary across different model years, so check the manual for confirmation. After removal, clean the glass to prevent residue from obstructing visibility. If unsure, take photos and seek help from a professional shop.