How to Remove the Interior Rearview Mirror of a 2007 Accord?
3 Answers
The method to remove the interior rearview mirror of a 2007 Accord is: 1. Pinch the cylinder behind the rearview mirror; 2. Rotate it counterclockwise by 45 degrees to remove it. Taking the 2007 Accord manual standard version as an example, its body structure is a 4-door, 5-seater sedan with body dimensions of: length 4854 mm, width 1821 mm, height 1463 mm, wheelbase 2738 mm, minimum ground clearance 155 mm, and fuel tank capacity 55 liters. The 2007 Accord manual standard version is equipped with a 2.0L naturally aspirated engine, with a maximum power of 110 kW at 6000 rpm, maximum torque of 186 Nm at 4500 rpm.
I've been driving a 2007 Accord for many years, and removing the interior rearview mirror is quite simple. Generally, you just need to hold the plastic base part of the mirror and gently twist it counterclockwise, then it will pop out. Remember not to use too much force, and if it gets stuck, avoid hitting the windshield with hard objects as it may crack. From experience, I know many people are afraid of doing it wrong the first time, but actually, there's a small clip at the mirror's connection point—just rotate it about 45 degrees to release it. After removal, you can clean off dust or install a dashcam, which is very convenient. However, I recommend doing this in a flat parking spot, safety first, and don't rush. If it really won't budge, it might be stuck due to aging—try applying some silicone oil as a lubricant; in most cases, it will come off easily.
As a new car owner, I was quite nervous the first time I removed the interior rearview mirror of my 2007 Accord. It was for replacing the mirror, so I gripped the base and slowly twisted it counterclockwise – sure enough, it came loose. The process was easier than expected; the key is to take your time and gently test the angle, avoiding any forceful pulling to prevent glass damage. After removal, I noticed the base was quite compact. Cleaning it and reinstalling went smoothly. I recommend doing this when the car is stationary to avoid accidental touches. With a few more practices, you’ll get the hang of it. Now, I feel confident handling such minor tasks and can even inspect other components while at it.
