How to remove the headlights of the Baojun 730?
3 Answers
Baojun 730 headlight removal: The screws are fixed on the radiator frame. You only need to remove the screws on the radiator frame to take off the headlights. Below is some relevant information about car lights: 1. The car light switch is generally integrated into the lever-type switch on the left side of the steering wheel, although there are exceptions. Some models have a rotary-type light switch. As long as we turn or move the switch to the specified position, the corresponding exterior lights will turn on, and the dashboard will also display the corresponding indicator. 2. Generally, the low beam and high beam are referred to as car headlights. Simply turning the light switch to the low beam position will illuminate the low beams, which are sufficient for daily driving needs. However, there are special cases. If there are no streetlights on the roadside or the road is straight and long with poor visibility, please use the high beams.
Removing the headlights of the Baojun 730 is actually not difficult, as I've done it myself several times. Usually, I start by opening the hood and locating the battery, then disconnecting the negative terminal to prevent any electrical hazards. Next, I locate the fixing screws behind the headlight assembly—there are about three or four of them—and loosen them with a small Phillips screwdriver or a 10mm wrench. The design of the Baojun 730 is relatively straightforward, so there's usually no need to remove the front bumper; you can work directly on the headlights. When gently pulling out the headlight assembly, be careful not to yank it forcefully to avoid damaging the wiring connectors. After removal, simply align the clips when reinstalling. As for tools, a basic home toolkit is sufficient, and you can buy some inexpensive sets on Taobao as backups. Remember, this method is suitable for tasks like replacing bulbs or cleaning, but for more complex damage, I'd recommend checking online tutorials or consulting a mechanic friend. DIY can save you a lot of money and isn't hard to learn.
I've taken apart the headlights of my Baojun 730 myself, and I feel it's more user-friendly compared to some premium cars. First, I make sure the engine has cooled down before starting to avoid burns. Open the hood, locate the fixing screws near the headlight assembly—usually three on the Baojun 730—and a flat wrench will do the job. Be gentle when loosening the screws to avoid scratching the paint. Then, disconnect the electrical connector and gently wiggle the headlight to remove it. From my experience, if the connector is stuck, a small screwdriver can help pry it loose. When reinstalling, align it with the original mounting holes to prevent misalignment when the lights are on. The whole process takes about ten minutes; just have the right tools ready and avoid rushing or using excessive force. After removal, you can also clean the dust inside the lens to improve brightness. Before starting, watch some hands-on videos from owner forums to save time.
