How to Remove the Headlight of a Ford Mondeo Zhisheng?

1 Answers
OscarLee
07/29/25 7:05pm
The upper part of the Ford Mondeo Zhisheng headlight is secured with screws, while the lower part has clips. You need to open the bumper and pull from the bottom of the headlight. Detailed steps are as follows: 1. Open the vehicle's engine hood. 2. Remove the fixing screws at the top of the headlight. 3. Remove the bumper fixing screws from the front of the vehicle. 4. Pull out the bumper and cover it with a towel. 5. Lift the headlight from the bottom upwards while wiggling the top. 6. At this point, the headlight removal is completed. Introduction to the Ford Mondeo Zhisheng: 1. Body dimensions: Length is 4854mm, width is 1886mm, height is 1495mm, and wheelbase is 2850mm. 2. Materials: Many parts of the body use boron steel.
Was this review help?
15
2
Share
More Forum Discussions

What are the functions of the automatic transmission gears in the Haval Chitu?

Haval Chitu automatic transmission gear functions introduction: 1. D (Drive) Gear: This is the most frequently used gear. The D gear represents the forward driving gear, used for normal driving. Simply place the gear selector in the D position, and the car will automatically adjust gears while driving. During long downhill descents, because the D gear in automatic transmission cars does not have the engine braking function, it is not advisable to keep it in D gear, otherwise the speed will increase, leading to potential safety hazards. 2. P (Park) Gear: Used when parking. P means to move the gear selector to the P position when parking, locking the transmission's parking brake device to the output shaft. Tighten the hand brake, and the car will not move. 3. N (Neutral) Gear: This gear is rarely used, mainly during traffic light stops. N represents neutral, used when starting the car or towing. If waiting at a traffic light for a long time, it's best to shift into N gear and tighten the handbrake. However, coasting in N gear downhill is prohibited as it not only doesn't save fuel but also damages the transmission. 4. R (Reverse) Gear: R gear is the reverse gear, used when reversing. Do not shift into reverse gear before the car has completely stopped, otherwise, the transmission will wear out quickly. The car is equipped with a reverse camera, which will display on the central screen when R gear is engaged. 5. L (Low) Gear: Equivalent to 2nd gear, often used when going up or down hills. For example, when climbing a hill and the power is insufficient, shifting into L gear makes hill starts easier. In fact, shifting into L gear limits the car's automatic gear shifting to the lowest gear only. 6. S (Sport) Mode: Some models are equipped with an S gear. When the car is in S gear, it allows free gear shifting, but the shifting will be delayed. Therefore, the engine will maintain high RPM for a longer time, increasing fuel consumption, but also providing greater torque output, usually used when overtaking.
8
2
Share

What Causes the Intermittent Operation of the Buick Excelle Windshield Wiper?

The intermittent operation of the Buick Excelle windshield wiper is due to an internal short circuit in the wiper motor. The wiper linkage has multiple connection points, and observing the wiper's operation can help determine if the linkage is faulty. Importance of the Wiper: Among all automotive components, the windshield wiper is relatively small. However, it is crucial as it ensures clear visibility during rainy weather. According to an international driving safety survey, the accident rate caused by aging wipers during rainy conditions is approximately five times higher than usual. Beam-style wipers distribute pressure evenly across the entire force-conducting strip, ensuring uniform force application on the wiper blade. This reduces the occurrence of water streaks and scratches, delivering better wiping performance. Additionally, they significantly reduce vibration wear and offer advantages such as even force distribution, sun protection, simple structure, and lighter weight. As a result, the lifespan of the wiper motor and blade is at least doubled compared to conventional wipers, making them more economical and reliable. Checking the Wiper Motor: After opening the car hood, the wiper motor can be seen. Touching the motor by hand—if it feels hot—indicates an internal short circuit, and replacing the motor will resolve the issue. Checking the Wiper Blades: Neglecting wiper blade maintenance may lead to severe damage, rendering them ineffective during rain. In such cases, replacing the blades promptly is necessary. Checking the Wiper Linkage: The wiper linkage has multiple connection points, and issues here can disrupt normal operation. Observing the wiper's movement helps determine if the linkage is faulty. Checking the Wiper Fuse: To protect the car's electrical system, each electrical device has a fuse. If the wiper fails to function, inspect whether the wiper fuse is blown and replace it with a spare fuse if needed. Checking the Wiper Switch: Although the wiper switch is not frequently used, automotive electronics can be unstable. If no issues are found in the above checks, the wiper switch might be faulty. Using a multimeter to test the switch or replacing it with a new one for testing is advisable.
17
5
Share

What to Do When the Windshield Fogs Up Outside While Using Air Conditioning in Summer?

For situations where fogging has already occurred, in severe cases, you can first use the windshield wipers to remove it, then appropriately direct some warm air towards the windshield, and the fog will dissipate immediately. Related explanations are as follows: 1. Temperature Difference: In summer, the air is humid. When the cabin air conditioner is turned on for a while (especially when the temperature is set very low), the cabin temperature becomes much lower than the outside air temperature, and the windshield temperature also decreases accordingly. 2. Principle: When the windshield temperature drops to the dew point of water vapor, the moisture in the air will condense upon contact with the windshield. Since the air's moisture content is insufficient to form water droplets, it can only form tiny water particles. Due to water's surface tension, numerous small water particles connect to form a thin layer of fog.
2
4
Share

What to Do If You Can't Pass the Driving Test (Subject 3)?

Practice makes perfect. Subject 3 is not insurmountable. With sufficient practice time and grasping the essence of the training, anyone with normal intelligence can definitely pass. The key lies in persistent practice and remembering the various tips taught by the instructor. Below are some driving school practice considerations: 1. Maximize practice opportunities: Some learners practice intermittently without consistency - this approach won't work. Strive for more practice time. 2. Master technical maneuvers: Firmly remember the technical actions taught by the instructor. These maneuvers are essentially tricks that prove extremely useful when mastered. 3. Seek advice from experienced drivers: Consult frequently with skilled drivers around you to deepen your understanding. Only through proper comprehension can you drive well. 4. Strictly follow standards: During training, the instructor's teachings might differ from conventional wisdom. While driving lessons may seem dogmatic, strict adherence is necessary. 5. Think critically: If certain maneuvers aren't executed perfectly initially, there's room for correction. Therefore, engage in active thinking to analyze why mistakes occur, facilitating better progress.
18
4
Share

How soon can I take the Subject 4 test after passing Subject 3 in Xi'an?

After passing Subject 3, there are three scenarios for the Subject 4 test schedule: 1. Taking the test directly on the same afternoon; 2. Taking the test within 9 days without appointment—you can go to the Subject 4 test center with your ID card within 9 days after passing Subject 3; 3. Making an appointment after 10 days—whether the appointment is successful depends on the current number of test-takers, the priority of the student, and temporary arrangements at the test center. The specific scenario depends on the driving school's arrangements. Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. The main content includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. The Subject 4 test consists of 50 questions, presented in the form of case studies, images, animations, etc. The total score is 100, with a passing score of 90.
16
5
Share

What Causes the Chevrolet Cruze to Feel Sluggish and Lack Power When Accelerating?

The reasons why the Chevrolet Cruze feels sluggish and lacks power when accelerating are: 1. Throttle system blockage: For the vehicle's engine to operate, fuel and air are essential factors. A lack of either can prevent smooth operation. If the air filter or throttle system is blocked, the engine's air intake will be severely insufficient, leading to a lack of power when accelerating. If the fuel injector or oxygen sensor malfunctions, the engine's fuel injection state will become unstable, causing issues such as rough idling, poor acceleration, and increased fuel consumption. 2. Engine oil system problems: The importance of engine oil cannot be overstated, as it lubricates, reduces friction and resonance, and enhances the smoothness of engine operation. If the engine oil is insufficient for a long time, the milder symptoms include reduced power and increased fuel consumption, while more severe cases may result in piston knocking against the piston door, damaging related components. When the fuel pump malfunctions or the fuel filter is clogged, it can also lead to poor acceleration. 3. Clutch slipping: In this scenario, the lack of acceleration power is most noticeable during driving when the vehicle speed fails to increase with the engine RPM. There is a significant loss of engine power during transmission, which also causes poor acceleration, especially when going uphill.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.