How to Remove the Grille of a Haval H6?
3 Answers
Haval H6 grille removal method: First, remove the decorative cover, daytime running lights, and fog lights on the grille. Then, remove the front bumper and the two screws near the upper and lower headlights, along with other clips. Use a small flat-head screwdriver to gently pry off the original grille and replace it with the upgraded version, ensuring the grille is properly seated. Reinstall it onto the vehicle to complete the process. Here are some precautions for modifying the grille: 1. The adhesive surface must be kept absolutely clean and dry. Generally, clean with a lint-free cloth dipped in a 50% solution of alcohol, isopropanol, acetone, or toluene. Wait until the solvent has completely evaporated before applying the adhesive. 2. Before applying the adhesive, position the product on the desired installation area and adjust it properly. Once the installation position is confirmed, remove the red film and proceed with the application. Avoid contact between fingers and the adhesive surface during the process. After application, press firmly to ensure full contact and wetting of the adhesive surface. 3. After the product is applied to the part, avoid contact with water and excessive dust for 24 hours to achieve optimal bonding strength.
As a long-time Haval car owner, I have plenty of experience removing the H6 grille. Before starting, ensure the engine is off and cooled down, and prioritize safety by opening the hood. The grille is secured by plastic clips at the top and screws—use a flathead screwdriver or a dedicated pry tool to gently release the clip heads, avoiding excessive force to prevent breakage. Apply even pressure gradually from the edges, and keep track of any screws removed. Once the grille is off, handle it gently and take the opportunity to clean off dust. When reinstalling, align it properly with the mounting holes and press firmly until you hear a click. The whole process is straightforward and quick, taking about ten minutes with careful handling, making it ideal for DIY enthusiasts to try.
I remember the first time I took apart the H6 grille, the process was quite straightforward. Park the car and open the hood, the grille is clearly secured with clips at the grill position. Carefully pry the center of each clip with a household flathead screwdriver, but don't use too much force to avoid breakage. Once removed, it's easy to clean or inspect. Before reinstalling, ensure the clips are intact and gently snap them back into place. Wearing gloves is recommended to prevent scratches, and a common screwdriver is all you need. Even beginners can handle it easily, but stay focused to avoid mistakes.
