How to Remove the Golf Air Filter?
4 Answers
Method for removing the Golf air conditioning filter: Open the engine compartment hood. The air conditioning filter is located inside the air filter box at the front of the engine. Use a screwdriver to loosen the screws on the edge, lift the cover, and then remove the upper cover plate to take out the air filter. Below is an introduction to the functions of the air conditioning filter: 1. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air. 2. It has strong and lasting moisture absorption capabilities, preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. 3. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. 4. It effectively sterilizes and deodorizes, maintaining clean cabin air and preventing bacterial growth, thus creating a healthy environment. 5. It effectively separates solid impurities such as dust, powder, and grinding particles from the air.
I often help my friends with maintenance on Volkswagen models. Removing the air filter on a Golf is quite simple. Open the engine hood and locate the black plastic box, which is the air filter assembly. There are several metal clips on the box—just gently pry them open, but don't use too much force or the plastic might crack. After lifting the top cover, you'll see the square-shaped filter inside, which can be pulled straight out. Remember to take photos of the filter with your phone, especially the front and back sides, so you won't mix up the orientation when reinstalling it. If the filter looks black and has leaves stuck to it, it's definitely time for a replacement. The whole process takes about ten minutes, so there's no need to waste money at a repair shop.
Just changed the air filter on my 7.5-gen Golf over the weekend. First turned off the engine and waited for it to cool down - safety first. The air filter box is on the right side of the engine, with several T-shaped clips on the cover that can be popped open using a screwdriver handle. When pulling out the filter, be careful not to snag it in the corners - I almost tore mine that time. When installing the new filter, make sure to press the edges firmly to prevent dust leakage into the engine. Took the opportunity to wipe dust from the box bottom and found a dried-up gecko corpse in the intake - no wonder there was always a weird smell before. The maintenance manual recommends replacement every 15,000 km, but with all the dust up north, I usually change it every 8,000 km.
Experience of DIY replacing the Golf MK6 air filter: Locate the square plastic box next to the engine, press the four clips to remove the top cover. When pulling out the old filter, avoid shaking off dust - directly bag and discard it. Insert the new filter in the original orientation, being careful not to bend the rubber edges. When pressing the cover clips back, listen for the 'click' sound to ensure proper engagement. Forgetting to close the cover before starting the engine will trigger a fault code! Once in a hurry, I forgot to reconnect the wiring harness connector and got startled by the yellow dashboard warning light. Had to use a diagnostic tool to clear it later.
