How to Remove the Glove Box of the Vezel?
3 Answers
The method to remove the glove box of the Vezel is: 1. Open the glove box and press inward on both plastic clips; 2. Release the glove box and flip open the left-side lever. The Vezel is a compact SUV with body dimensions of length 4328mm, width 1772mm, height 1605mm, a wheelbase of 2610mm, and a fuel tank capacity of 50 liters. The Vezel is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW at 6600rpm and a maximum torque of 155Nm at 4600rpm, paired with a 6-speed manual transmission.
I have quite a bit of experience removing the glove box in the Honda HR-V. The first step is to open the glove box to its maximum angle, which exposes the clip positions on both sides. If you look carefully, there are plastic protrusions on the left and right inside—those are the clips. Press the protrusions inward with your fingers while gently pulling the entire glove box outward with your other hand, and it will come off easily. Be careful not to use too much force, as the plastic parts can crack easily—I once broke one and had to replace it later. As for tools, your hands are usually enough, but if it's stuck tightly, you can use a flathead screwdriver for assistance. Once removed, you can thoroughly clean out dust or replace the cabin air filter, which works great. There's also a small damper rod connected under the glove box—be gentle when pulling to avoid snapping it. When reinstalling, just align the clips and push until you hear a click. The whole process should take no more than ten minutes. Beginners should watch online video tutorials to avoid mistakes. Regularly removing it can also extend the glove box's lifespan.
As a car owner, I've learned quite a few practical tips from removing the Honda HR-V glove box. The method is actually quite simple: first fully open the glove box, there are clips on both the left and right sides inside. Press them inward at the fixed points with your thumb or index finger, apply slight pressure toward the front of the car, and with your other hand slowly pull the entire box outward - this will release it. I was a bit nervous at first, afraid of breaking the plastic, but later found that gentle movements are sufficient as the clip design is quite sturdy. When reinstalling, just align it properly and push it back in. It's best to operate with the car key removed to prevent any accidental electrical shorts. After removing the glove box, I often wipe away internal stains or check if the cabin air filter is clogged. Regular maintenance like this keeps the interior cleaner and promotes healthier breathing. Just use your hands as tools - no need for professional equipment. Remember not to remove plastic parts under hot sunlight as they become brittle. The whole process is quite straightforward.
