How to Remove the Glove Box of the Vezel?

[EmeryLynn]

The method to remove the glove box of the Vezel is: 1. Open the glove box and press inward on the plastic clips on both sides; 2. Release the glove box and pull the left lever to remove it. The Vezel is a compact SUV with body dimensions of: length 4328mm, width 1772mm, height 1605mm, a wheelbase of 2610mm, and a fuel tank capacity of 50 liters. The Vezel is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW at 6600rpm and a maximum torque of 155Nm at 4600rpm, paired with a 6-speed manual transmission.

[Jayden]

I remember helping a friend remove the glove box of a Vezel a few days ago, and the process was quite simple. The first step is to empty everything inside to avoid any leftover items getting in the way. Then, check both sides of the glove box—there are usually two clips there. Press them downward or inward with your fingers while slowly pulling the glove box outward with your other hand. If it feels stuck, don’t force it to avoid breaking the plastic parts. Instead, check if there are any hidden screws or loose spots on the sides. Once removed, you’ll see the position of the cabin air filter, making it easy to replace or clean. This task is perfect for beginners to practice DIY, saving money on a trip to the repair shop—it takes less than 10 minutes to complete. Just make sure to align the clips properly when reinstalling. I think regular removal and cleaning can also prevent odors, making it very practical.

[DelPhoebe]

As a frequent DIYer, I'd like to share some glove box removal tips for the Honda Vezel. Simply locate the two plastic clips on the inner sides of the glove box opening. Use your fingers to simultaneously press both clips until they release, then gently pull the glove box outward. Remember to operate with the engine off and wear gloves to prevent scratches. Once removed, the interior structure is exposed for easy maintenance like replacing the cabin air filter or dust removal. During reassembly, ensure proper clip alignment and push gently until you hear a click. Don't worry about damage - the plastic is durable but may crack with excessive force. The whole process is safe and controllable, saving both time and money through DIY.

[StCaleb]

Last month, I removed the glove box of the Vezel for dust cleaning, and the steps were not difficult. First, I took out the items inside the glove box to prevent loss. Then, I pressed the side clips. I wrapped my fingers with a soft cloth for a steadier press while slowly pulling out the glove box. After removal, I could clean or replace the filter. That time, I solved the issue of air conditioning odor. Be careful with the force during operation; avoid using tools to pry hard. When reinstalling, just align it with the slot and give it a push—simple and effective.