How to Remove the Glove Box of a Land Rover Range Rover?
4 Answers
Land Rover Range Rover glove box removal method: Pry out the decorative trim of the center console below the ashtray, remove the decorative panel on the dashboard, unscrew the panel's screws and take off the panel, then remove the three screws at the top and two screws at the bottom securing the glove box and take off the glove box. The Land Rover Range Rover is a model from Land Rover, with body dimensions of 4999mm in length, 2073mm in width, and 1835mm in height, and a wheelbase of 2922mm. In terms of appearance, the Range Rover features body-colored side air intake designs, with the long-wheelbase version adopting a more striking Atlas side air intake design. It also comes upgraded with bright metal pedals and pixel-style full LED headlights, paired with 22-inch 11-spoke silver alloy wheels, giving it a more dynamic visual appeal.
I've taken apart the glove box of my Land Rover Range Rover several times, and it's a fairly simple manual task. First, you need to open the glove box door and look inside. There might be a few small screws securing it at the bottom or sides—just gently unscrew them with a Phillips screwdriver. Then, there are plastic clips around the box. Squeeze them firmly or use a tool to pry them loose, but avoid using excessive force, as you might break the clips or scratch the interior. During the process, watch out for any connected wires, like the glove box light cable. If you spot a connector, carefully unplug it before pulling the whole thing out. The first time I did it, I didn’t know better and yanked it, breaking a clip—replacing the part later was a hassle. Once it's off, cleaning or replacing things is easy. To reinstall, just reverse the steps: push the clips back in and tighten the screws. All you need are a screwdriver and a pry tool. If you're not familiar, check YouTube for videos—they're more intuitive than the manual. In short, just be patient—it's a beginner-level DIY skill.
As an experienced driver who frequently drives, I dismantle the glove compartment myself to clean out dust, as my kids often drop snacks inside. The disassembly steps are simple: Open the glove box, first inspect the interior—sometimes there are screws at the bottom that need to be removed, just use a screwdriver to handle it. Then, gently pry open the plastic clips, which may be located on both sides—take your time to avoid damaging the plastic parts. Don’t forget to check if there’s a small bulb wire at the hinge of the door and gently unplug the connector. If the clips are too tight, you can use a pry tool for assistance, but I always prefer using my fingers to minimize risks. When reassembling, align the clips properly and listen for a click to confirm they’re securely in place. It’s advisable not to overload the glove box to prolong the life of the clips. If you’re not experienced, I recommend asking a knowledgeable friend to help to avoid causing issues that could delay your trip. Safety first—a loose glove box can distract you while driving.
Removing the Range Rover glove box is quick and easy, just four steps: Open the glove box, locate and unscrew the fixing screws; gently press the clips on both sides to release; unplug the light connector; then pull out the box. The only tool needed is a screwdriver. The clip positions are usually along the inner edges—be careful not to damage them. It's convenient for cleaning or upgrades, just remember to align the slots when reinstalling. For efficiency, review the tutorial once more before starting.
