How to remove the gear lever of Hyundai ix35 automatic transmission?
2 Answers
Modern ix35 automatic transmission gear lever removal method is: use a flat head to pry open the cover under the gear lever, there is a locking switch below, use a flat head to flip the switch open to remove the gear lever. The Hyundai ix35 is an SUV model under Hyundai, equipped with two engines in total, one is a 1.4-liter turbocharged engine, and the other is a 2.0-liter naturally aspirated engine. The 1.4-liter turbocharged engine of the Hyundai ix35 has a maximum power of 103kw, a maximum torque of 242nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 1500 to 3200 rpm, equipped with direct injection technology.
To remove the automatic gear lever of the Hyundai ix35, first disconnect the negative terminal of the battery to prevent circuit shorting. Shifting the gear lever to the N position makes it easier to work with. Carefully pry open the edges of the center console trim using a plastic pry tool, starting near the cup holder, being careful not to scratch the plastic clips. After lifting the trim, you'll see the metal clamp securing the gear lever. Use a 10mm socket wrench to remove the two screws, then gently unplug the shift lock harness connector at the base of the gear lever. Finally, you can pull the entire gear lever upward. Last time I replaced the gear knob, I found the internal spring prone to jamming, so I lubricated the metal parts with WD-40 while at it. When reassembling, make sure the locking clip clicks into place securely. The whole process takes about half an hour, but beginners are advised to use a flashlight to carefully examine the clip structure.
