How to Remove the Fuel Tank Cap of the Avalon?

1 Answers
DeMalia
07/30/25 6:29am
The method to remove the fuel tank cap of the Avalon is: 1. Soak the plastic shell part of the fuel tank cap in boiling water; 2. Use a flat-head screwdriver to pry open the joint between the plastic shell and the metal part; 3. Pull out the lock cylinder and plastic lock cylinder slot from the metal shell; 4. Insert the key into the lock cylinder and pull out the clip. The Avalon is a mid-size 4-door 5-seater sedan with body dimensions of: length 4975mm, width 1850mm, height 1450mm, and a wheelbase of 2870mm. It is equipped with a 2.5L naturally aspirated engine and an 8-speed automatic transmission, delivering a maximum power of 154 kW and a maximum torque of 250 Nm.
Was this review help?
20
1
Share
More Forum Discussions

What Are the Reasons for Poor Air Conditioning Performance in Vans?

The reasons for poor air conditioning performance in vans are as follows: 1. Condenser cooling issues: The condenser located in front of the car engine can have its cooling efficiency reduced if its surface is covered with oil, dirt, catkins, or other debris. Additionally, faults in the cooling fan, such as a loose drive belt, reduced fan speed, or high-speed fan issues, can also lead to decreased condenser cooling performance. 2. The need to replace the air conditioning filter: The primary function of the air conditioning filter is to filter out impurities like dust, pollen, and moisture from the air. Over time, it will inevitably become clogged with dirt. If not cleaned or replaced in time, it will result in reduced airflow, poorer cooling performance, and even emit unpleasant odors. 3. Long-term use of external circulation: External circulation draws air from outside the vehicle, passes it through the condenser, and then into the cabin. If external circulation is used for a prolonged period, continuously drawing in high-temperature outside air, the cooling effect will certainly be worse than using internal circulation.
4
4
Share

Is the Dynaken Range Rover a Land Rover?

Dynaken Range Rover is indeed a Land Rover. Here are the specific details: Reason: Although it is not called the Land Rover Range Rover, it is essentially still a Land Rover Range Rover. This involves issues related to 3C product naming and customs declaration adjustments. Most parallel-imported vehicles enter the country under the 3C form, which dictates the vehicle's name. Vehicles imported through small 3C channels are considered modified vehicles (nominally modified vehicles), and their product names must not duplicate those of officially imported models. Origin of the Dynaken Range Rover: The Dynaken Range Rover is a parallel-imported version of the "Land Rover Range Rover." It was originally manufactured by Land Rover and later modified by "Abdullah Abdulafani Brothers Group subsidiary" to become the "Dynaken Range Rover" product. It is then imported through "non-Land Rover original factory channels," hence it cannot be called Land Rover Range Rover in the domestic market.
8
3
Share

How many kilometers does an Audi Q5 need to run before requiring a major overhaul?

This situation depends on how well the engine is maintained. With normal maintenance, the engine can be used for 300,000 kilometers without needing a major overhaul. It is recommended to perform regular maintenance on time. Introduction to car major overhaul: A car major overhaul refers to a restorative repair where a new car or a car that has undergone a major overhaul, after traveling a certain mileage or time, undergoes testing, diagnosis, and technical evaluation. The repair or replacement of car parts is used to fully or nearly fully restore the vehicle's technical performance. Phenomena indicating a car major overhaul is needed: Uneven cylinder pressure: The cylinder compression pressure should meet the original design specifications. If it does not meet the requirements when checked with a tachometer and cylinder pressure gauge, it is considered unqualified if there is a pressure difference between cylinders. Large idle speed fluctuations: The engine idle speed should operate stably, with the speed conforming to the original design specifications. Low power: The engine's maximum power should not be less than 90% of the originally designed rated value, as measured by a dynamometer according to relevant regulations.
1
5
Share

How high is the failure rate of the Emgrand GL after five years?

As long as the Emgrand GL is properly maintained and used, there are not many failures, and its performance in all aspects is quite good. Below are the specific details about the Emgrand GL: Exterior: The Emgrand GL continues the family-style water ripple grille. The front of the car features new integrated LED headlights for both high and low beams, with the fog lights repositioned above the LED daytime running lights. The new 17-inch wheels and chrome-plated door handles enhance the overall texture. Additionally, the dual-exhaust outlet design adds a sporty and youthful look to the car. Interior: The Emgrand GL is equipped with a three-spoke multifunction steering wheel and a large central control LCD screen, giving the car a youthful appearance overall. It also includes smart features, supporting remote control via a mobile app, which allows functions like remote engine start, window operation, and air conditioning control.
3
1
Share

What battery does the Axela use?

The Axela comes with a British ALEPH 55D36L battery as standard. It has a capacity of 55AH. The battery is an essential part of a car and can be categorized into traditional lead-acid batteries and maintenance-free batteries. Below are some precautions regarding the Axela battery: 1. Liquid level: The electrolyte level should always be maintained between max and min. Check it monthly and top up with distilled water (pure water) as needed. Never add acid. 2. Timely charging: When the battery voltage is low, and the lights are dim or the engine struggles to start, perform an external charge promptly. Avoid overcharging or prolonged undercharging, as overcharging can cause active material shedding, while undercharging can lead to plate sulfation. Ensure the regulator voltage is neither too high nor too low. 3. Precautions: During use, regularly check if the vent holes are clear to prevent battery deformation or explosion. Keep the battery away from heat sources and open flames. Ensure proper ventilation during charging and use to prevent burns or injuries.
13
2
Share

Why is the car key unresponsive after replacing the battery?

After replacing the car key battery, it needs to be re-paired before it can be used. Below are specific instructions for car key replacement: 1. Re-pairing method: Insert the remote key, turn it to the "1" position, then quickly return it to the 0 position. Repeat this 4 times and swiftly remove the key. Press any button, such as the unlock button, for 4-5 seconds until you hear a sound from inside the car. The key coding is now complete. 2. Smart key principle: Smart keys can emit infrared signals to open one or two doors, the trunk, and the fuel filler cap, as well as operate the car's windows and sunroof. More advanced smart keys resemble credit cards; when the driver touches the door handle, the central locking system activates and sends a wireless query signal. After the smart key card responds correctly, the car lock automatically opens. The engine will only start when the central processor detects the key card inside the car.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.