How to remove the fan of Landwind x9?

[CalebDella]

Landwind x9 fan removal method: First, open the hood of the Landwind x9, remove the intake pipe located above the radiator fan, which allows for easy removal of the radiator fan. The radiator fan and the air conditioning fan are mounted on the fan frame, with four corners, each secured by a screw. Use professional tools to unscrew these four screws. Once all screws are removed, the radiator fan can be taken off the vehicle. The Landwind x9 is a model under Jiangling Motors Group, with body dimensions of 4420mm in length, 1780mm in width, 1820mm in height, and a wheelbase of 2330mm. In terms of appearance, the Landwind x9 features a predominantly square and robust design, with bold body lines and muscular wheel arches, exuding a wild and passionate vibe.

[ManuelAnn]

I've taken apart the Landwind X9's fan several times. The process isn't too complicated but requires attention to detail. First, turn off the engine and let it cool down—don't rush to avoid burns. Then, disconnect the negative terminal of the battery for safety to prevent electric shock. The fan is usually located behind the radiator, so you'll need to lift the engine cover to find it. The fan is secured with bolts or clips; use a wrench or screwdriver to loosen them, then gently unplug the power connector—be careful not to pull the wires too hard. When removing it, watch out for the sharp blades; wearing gloves can prevent cuts. The last time I removed it was to clean dust buildup on the blades, which improved the car's overheating issue. You'll just need a wrench and a cleaning brush, and it takes about twenty minutes. After removal, check for blockages, and when reinstalling, make sure it's properly aligned—don't be careless.

[KateFitz]

I learned this trick from the master while observing how to remove the fan. First, stop the engine and let it cool, then disconnect the negative battery terminal for safety. The fan is located near the front grille with connecting wires and fasteners. Be gentle when unplugging the connector, use tools to slowly remove the bolts, and lift it out carefully. Wear gloves to avoid injury. The first time I was nervous, but after removing it, I wiped the dust off the blades with a damp cloth, reinstalled it, and the car's cooling system worked fine again. The steps are simple—just avoid pulling too hard. While removing it, you can also check other components like the radiator fins to see if they need cleaning. Beginners are advised to have a friend assist rather than attempting it alone.

[MirandaAnn]

Removing the Lufeng X9 fan is quite simple. After turning off the engine and letting it cool, disconnect the battery. The fan has clips in front of the radiator. Loosen the bolts, remove the plug, and lift it out. For safety, wear gloves. After removal, check for any damage and clean the blades. When reinstalling, ensure it's securely fixed without any looseness. The whole process can be completed in just a few minutes without much hassle.