How to Remove the Door Panel of Honda City?
2 Answers
There are several clips at the armrest area. Prying them open will reveal the screws, but without sufficient experience and skills, it's easy to damage the door. The Honda City is a relatively fuel-efficient model in its class with stable overall quality. The removal steps are as follows: 1. Remove the fixing screws: Located inside the door handle, covered by a sealing plug. Remove the plug to access the screws; 2. Remove related components: The plastic trim clip near the A-pillar inside the door, which is secured by plastic hooks at the back, can be directly unclipped; 3. Remove the door trim panel: The door trim panel is fixed along the rear edge with plastic hooks, which can be unclipped one by one.
Removing the door panel of a Honda City, I've been into cars for years and have repaired door interiors several times myself. Let's start with the preparation: you'll need a screwdriver, a plastic pry tool, and gloves to protect your hands from scratches. Open the door and locate the small trim panel inside the door handle—there's usually a screw there that needs to be removed with the screwdriver. Then check around the window switch area, as there might be hidden screws. Once those are out, gently pry the edges of the door panel with the pry tool, being careful not to use too much force to avoid breaking the clips. There might be electrical connections, like those for the power windows, so disconnect them carefully. Take your time and don’t rush—if a clip breaks, you’ll need to replace it, or the panel will become loose. After removal, you’ll have more space for cleaning or replacing speakers, but remember the positions so you can align the clips when reassembling. Safety first—never remove the panel while the engine is running to avoid short circuits or door deformation. Beginners should watch video tutorials for guidance, and with a bit of practice, it’ll become easy.