How to Remove the Dashboard of Volkswagen Lavida?
2 Answers
To remove the dashboard of Volkswagen Lavida, first detach the steering column cover. There are two screws inside that secure the dashboard. Remove these screws to take off the dashboard. Below is a brief introduction about car dashboards: 1. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Conventional car dashboards typically feature a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge.
Last time I disassembled the dashboard of my Lavida myself. The first step was to turn off the power, then remove the plastic trim panel under the steering wheel, which is secured by clips. You can gently pry it open with a plastic pry tool, but never use metal tools to avoid scratching the panel. Next, adjust the steering wheel to the lowest position for easier access and use a T20 screwdriver to remove the four screws securing the instrument cluster. The most critical step is unplugging the wiring harness connector—press the clip and slowly wiggle it out; pulling hard can break the pins. Throughout the disassembly and reassembly process, protect the dashboard surface, preferably by placing a towel underneath. After reassembly, check that all connectors are securely plugged in, and look for any warning lights when you turn the power back on. DIY saves money, but if you accidentally damage the airbag sensor wiring, it could be troublesome. If you're unsure, it's better to have a professional handle it.
