How to Remove the Central Control Navigation of Trumpchi GA5?

1 Answers
Evan
07/30/25 2:42am
The method to remove the central control navigation of Trumpchi GA5 is as follows: 1. Pry off the interior trim panel; 2. Unscrew the screws securing the interior trim panel; 3. After removing the screws, take out the CD player, which has two connectors at the back; 4. Release the clips and separate the wiring harness from the CD player. Taking the Trumpchi GA5 2013 1.8L Automatic Luxury model as an example: The dimensions of this car are 4800mm in length, 1819mm in width, and 1484mm in height, with a wheelbase of 2710mm. It is a 4-door, 5-seater sedan with a 5-speed automatic transmission and a maximum power output of 106kw.
Was this review help?
11
5
Share
More Forum Discussions

What engine is used in the Baojun 310?

The engine of the Baojun 310 is produced by SAIC-GM and is a domestically manufactured four-cylinder naturally aspirated engine. The engine model of the Baojun 310 is LMH, with a maximum power of 59 kW, a maximum torque of 112 Nm, and a maximum horsepower of 80. For daily maintenance of the Baojun 310 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard being no lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates out, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
8
3
Share

How to Open the Fuel Tank of Borgward BX7?

To open the fuel tank of the Borgward BX7, simply press the fuel tank cover when the vehicle is unlocked. The inner fuel tank cover has a designated placement area, so the owner does not need to hold it during refueling. The Borgward BX7 features a robust design with a roof-mounted spoiler that integrates a high-mounted brake light, using LED light strips. Additionally, the new car adopts a dual-exhaust layout on both sides. The dimensions of the Borgward BX7 are 4715mm in length, 1911mm in width, and 1690mm in height, with a wheelbase of 2760mm. It is equipped with a 6-speed automatic transmission and features such as front seat heating, rear parking radar, automatic parking, electronic parking brake, ECO mode, and electronic stability control.
5
3
Share

Which country produces the Lynk & Co 05?

The Lynk & Co 05 is produced in China. The Lynk & Co 05 is a compact 5-door, 5-seat SUV with dimensions of 4592mm in length, 1879mm in width, and 1628mm in height, and a wheelbase of 2734mm. It is equipped with an 8-speed automatic transmission and can reach a top speed of 230 kilometers per hour. The front suspension of the Lynk & Co 05 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The tire specifications are 235/50R19. It comes with features such as ABS anti-lock braking system, brake force distribution, brake assist, traction control, tire pressure monitoring, full-seatbelt reminder, child seat interface, keyless start system, and a rearview camera.
13
5
Share

Which car has a vertical logo?

The car with a vertical logo is the WEY brand under Great Wall Motors. Taking the WEY VV7 as an example: it uses a 2.0T L4 turbocharged engine with a maximum torque of 387 N·m and a maximum horsepower of 227. It is equipped with body stability control, brake assist, engine electronic anti-theft system, full-speed adaptive cruise control, front and rear radar, 360-degree panoramic imaging, and engine start-stop technology. The WEY VV7 has a length, width, and height of 4760mm, 1931mm, and 1655mm respectively, with a wheelbase of 2950mm, a top speed of 205 km/h, and is equipped with a 7-speed dual-clutch transmission.
8
0
Share

What brand of tires does the Geely Emgrand use?

Geely Emgrand uses Giti tires. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, enabling contact with the road surface, and ensuring the vehicle's driving performance. The Geely Emgrand is a compact 4-door 5-seater sedan with dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. It is equipped with a 5-speed manual transmission, reaching a top speed of 170 kilometers per hour. The fuel tank capacity is 50L, featuring MacPherson strut independent front suspension and torsion beam non-independent rear suspension, with a front-wheel drive configuration.
20
4
Share

What does a triangle with an exclamation mark in a car mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant below the normal range. Transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire pressure abnormality: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.