How to Remove the Central Console of Volkswagen Touareg?
4 Answers
Check if the central passage of the Volkswagen Touareg is blocked by any foreign objects. Ensure there are no thin objects inside to avoid operational issues; Purchase a set of tools from a second-hand market. If there are no specialized inserts, a small knife can be used as a substitute to remove the shift seat cover of the new Emgrand vehicle; Insert into the two openings of the Volkswagen Touareg to release the clips. Do not apply excessive force; remove slowly; Use tools to remove the piano lacquer cover of the Volkswagen Touareg, then remove the four screws. Gently pry the cover above and pull the lid outward to open it.
I previously disassembled the center console of my Volkswagen Touareg by myself, and the whole process wasn't too difficult. First, locate a small plastic cover under the passenger seat, gently pry it open with a fingernail or a small pry tool to reveal several Phillips screws inside. Use a wrench to loosen them, but don't over-tighten. Then, slowly pry up the central trim panel along the edges of the console, being careful to avoid scratching the interior or breaking the clips. Once removed, you'll find several electrical connectors underneath, similar to those for the cigarette lighter or USB ports. Press the clips on the connectors to safely disconnect them—I recommend taking photos to note their positions to avoid mistakes when reassembling. I once forgot to disconnect the negative terminal of the car battery first, which caused a minor short-circuit issue, so remember to disconnect the power and wait a few minutes to prevent electric shock. After removal, I took the opportunity to clean out the dust inside and even added some small accessories. The whole process took about half an hour, but be sure to use plastic tools to protect the plastic parts from damage—if a clip breaks, it can be troublesome.
Having been in the car modification scene for a long time, removing the center console is like a walk in the park for me. The Volkswagen Touareg's structural design is quite tidy. The basic steps are to first disconnect the negative battery cable, then use a plastic pry bar to pop off the side covers of the center console to reveal the hidden screws. Once the screws are loosened, the entire trim panel can be lifted upwards. Don’t yank the wire connectors—find the small clips on the interfaces, press them gently to release, and then separate them. Otherwise, you risk damaging the wiring, which could cause issues with the air conditioning or audio system. If you have time, check for any loose or worn internal mounting points as part of regular maintenance. During my own disassembly, I’ve found debris stuck inside—clearing it out improves ventilation. Use compact tools and avoid metal pry bars to prevent surface scratches. Patience is key throughout the process; rushing it may lead to part deformation or irreversible damage.
I just bought a used Touareg and removed the center console to clean out dust buildup. A basic set of tools will suffice: a Phillips screwdriver, plastic pry tools, and gloves. First, locate and remove the small cover at the bottom of the console to expose the screws, then loosen them. Gently pry up the trim panel, being mindful of small wiring connections underneath - ensure the battery is disconnected before unplugging any connectors to prevent minor accidents. After removal, you can wipe down the interior or check if the clips are intact. The whole process takes about 20 minutes, but proceed carefully without using excessive force to avoid damaging components.
