How to Remove the Center Console of the Lingpai?
3 Answers
First, pry off the black frame around the head unit, then remove the fixing screws around the head unit, and take out the head unit. Disconnect the wiring harness at the back. Connect the wiring harness of the head unit to the new head unit, install the new head unit, and power it on for testing. After successful testing, tighten the screws to secure it. Finally, reinstall the black frame. Below is relevant information about the car's center console: 1. The car's center console is where comfort and entertainment devices such as air conditioning and audio are controlled. The car's center console includes the central control door lock system, allowing the driver to control the opening and closing of all doors and the window lift system. 2. The central control system mainly has three functions: central control, speed control, and individual control. The driver can control the locking and unlocking of all doors. Additionally, when the vehicle reaches a certain speed, the doors automatically lock. Each door has an independent switch for individual control.
I've disassembled the Honda Lingpai's center console a few times myself and found it fairly simple but requiring caution. First, turn off the engine and disconnect the negative battery terminal to prevent short circuits; prepare plastic pry tools to avoid scratching the panel with hard objects. The console is usually secured by several plastic clips—gently pry along the edges to loosen them, possibly starting from the bottom upwards or from the sides. Remember to remove any hidden screws or fasteners, typically located at the bottom. After opening, don't yank wiring connectors; first take photos to document their positions before disconnecting to avoid mistakes during reassembly. The Lingpai's center console is connected to the airbag system, and rough handling might trigger alarms, so proceed gently. During reassembly, check if clips are intact and replace any damaged ones. The whole process takes about 20 minutes; first-timers may want to spend extra time watching online tutorials—never rush to avoid damaging panels or circuits.
As someone who frequently works on car repairs, removing the Honda City's center console requires attention to tools and methods. After ensuring the battery is disconnected, use professional plastic pry tools to gently lift the panel from the edges. The clips are usually fixed around the perimeter and can be separated with a light pull—avoid using excessive force to prevent cracking. Hidden screws or fastening clips are often located beneath the center console; loosen and remove them. Before disconnecting any wiring harnesses, label each port position to prevent reverse connections that could cause short circuits or malfunctions. Connection points in the City model may be sensitive, especially modules affecting the airbag. When reinstalling, test all buttons for proper response. If you're not experienced, practice on a small section first. Prioritize safety throughout the process to avoid unnecessary risks.
