How to remove the center armrest box of Audi A6?
4 Answers
Remove the gear lever cover, pry open the gear panel, take out the fixing screw in the middle, and then pull out the gear lever. Then pry open the rubber pad at the bottom of the cup holder, take out the screw, remove the ashtray, and then lift the entire operation panel upward with force to remove the armrest box.
Removing the center armrest of an Audi A6 is actually quite interesting—I really enjoy doing this job. Let's start by preparing the tools: you'll need a Phillips screwdriver, a plastic pry bar, and a pair of gloves to prevent hand scratches. Open the armrest lid and remove all the small items inside, such as trays or mats. Then locate the screw holes, usually 2 to 4 small screws in the bottom corners—unscrew them slowly and don’t lose them. Next, use the pry bar to gently release the clips around the armrest. Audi's clip design is quite sturdy, so handle it carefully to avoid breaking the interior trim. If the armrest has USB charging or LED lighting features, remember to disconnect the wiring harness, which is hidden inside the armrest structure. When lifting the entire unit, be cautious of any hidden connections to avoid damage. After removal, it's a good idea to clean or inspect the parts, and check the manual for any model variations—for example, clip positions may differ between the C7 and C8 versions. Test the functionality afterward, and don’t rush reassembly. This task is time-consuming but great for practicing patience, and doing it yourself can save on repair costs.
When I was younger, I disassembled quite a few car armrest consoles, and the steps for the Audi A6 feel somewhat familiar. First, put on gloves to avoid getting dirt on the leather. Open the lid, empty the storage compartment, and locate the screws at the bottom—use a screwdriver to loosen and remove them one by one. For the clips, use a plastic tool to pry them open, but be careful not to apply too much force, as Audi interior materials are expensive and fragile. If you encounter wiring, such as the cigarette lighter connector, press the clip and disconnect the wire for safety. Take your time during the disassembly process—don’t rush. Lift the entire console step by step until it comes off. Afterward, don’t forget to clean accumulated dust or check for wear. When reinstalling, align the holes and secure the clips properly. From my experience, most issues arise from misaligned screws or broken clips—having a friend help hold things in place can save effort. Once you’ve fixed it and reassembled everything, the car will feel like new. Audi’s design is quite user-friendly, so don’t be afraid to mess up—older models are simpler than newer ones.
Removing the Audi A6 center console is quite straightforward—just follow these key steps. Start by wearing gloves for protection, open the lid, and remove all items inside. Check the bottom for screws, using a flashlight to locate the holes—typically two or three Phillips-head screws. Unscrew them with a screwdriver and set them aside. Next, use a plastic pry tool to gently release the clips along the edges, being careful not to damage them. If there are any wiring connections, simply unplug them. Then lift the entire console out, and take the opportunity to clean any dust or debris from the interior. The whole process takes about ten minutes with basic household tools. For reinstallation, align the console properly, press it back into place, reinsert the screws, and test the functionality. DIY is satisfying and saves a trip to the shop.
