How to Remove the Cabin Air Filter of Buick Envision?

3 Answers
MartinLee
07/28/25 5:36pm
Buick Envision's cabin air filter is located inside the glove box. To replace the cabin air filter, you need to first remove the glove box on the passenger side, take out the old filter, and install the new one. The cabin air filter of Buick Envision serves the following purposes: 1. Separating solid impurities such as pollen and PM2.5 from the air; 2. Absorbing moisture, carbon dioxide, vehicle exhaust, odors, and ensuring clean air in the cabin without bacterial growth. 3. The recommended maintenance interval for the vehicle's cabin air filter is every 10,000 kilometers or approximately every six months. If driving in areas with severe smog, it is best to replace it every three months.
Was this review help?
15
4
Share
Gertrude
08/11/25 9:42pm
I've taken apart the cabin air filter on my Buick Envision several times, and it's pretty straightforward. You sit in the front passenger seat, bend down to look at the area above the footwell—there's usually a cover panel there. Gently pry open the clips on both sides with your fingers, and the cover will pop off. Then just pull out the old filter. When installing the new one, pay attention to the arrow direction—it indicates airflow. Installing it backward affects filtration. I usually replace it once a year to keep the air fresh inside, which is especially helpful for families with kids to avoid dust allergies. Just remember not to use too much force—those plastic clips can break easily.
Was this review help?
18
2
Share
Expand All
Wood
09/30/25 2:22am
As a car enthusiast, I find removing the air conditioning filter to be a fun little challenge. The Envision's filter is hidden beneath the glove compartment on the passenger side. The specific steps are: first move aside the floor mat, locate the plastic cover panel, then gently pry open the clips with a screwdriver (no brute force needed). Take out the old filter to check dust accumulation, and install the new one with the arrow pointing in the correct direction. I always bring a flashlight to illuminate the workspace - the whole job takes just minutes. The key is regular replacement: every 10,000 km or annually to prevent bacterial buildup and cabin odors. Simple tools are all you need, saving money on mechanic fees.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the techniques for operating the clutch when learning to drive?

Learning to operate the clutch requires mastering the critical point of the clutch. You should slowly lift the clutch to gradually learn how to use it to start the car. Here are the relevant details: 1. Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. 2. Principle: For manual transmission vehicles, the clutch is a crucial component of the powertrain. It is responsible for disconnecting and connecting the power between the engine and the drivetrain.
7
4
Share

What to Do When the Dashboard Shows High Temperature Warning?

When this warning appears, it indicates a fault in the cooling system, usually caused by a lack of coolant. It is necessary to stop the vehicle promptly and check the coolant. Below is the relevant information: 1. Water Temperature Warning Light: The water temperature warning light is represented by a thermometer-like icon on the vehicle's computer panel. 2. Coolant: Coolant, also known as antifreeze coolant, is designed to prevent freezing. It prevents the coolant from freezing in cold weather, which could damage the radiator and engine block. Coolant is not just for winter use; it should be used year-round. As part of regular vehicle maintenance, the engine coolant should be replaced every year.
3
0
Share

Is the Ora Black Cat an Electric Vehicle or a Car?

The Ora Black Cat is an electric vehicle, a new energy vehicle that can be legally registered. Here is more information about the Ora Black Cat: 1. Vehicle Positioning: The Ora Black Cat is a new energy vehicle built on the ME platform, China's first dedicated electric vehicle platform developed by Great Wall Motors. 2. Vehicle Appearance: The Ora Black Cat offers 12 exterior colors and 8 interior colors, including new primrose pink and rose gold exclusive color schemes, along with rich interior color options such as titanium white and starlight silver. 3. Body Dimensions: The Ora Black Cat measures 3495mm in length, 1660mm in width, and 1530mm in height, with a wheelbase of 2475mm.
16
1
Share

How many seconds after stalling in Subject 3 is considered a failure?

As long as the vehicle stalls, it is considered stalling regardless of the duration. If the engine stalls due to improper operation, 10 points will be deducted once. However, no further mistakes can be made in the subsequent operation process; otherwise, the test will not be passed, and a retake will be required. Relevant information: 1. Main reason: Lifting the clutch too quickly when starting. If the clutch is lifted too quickly, the engine's output power and the transmission input shaft's power are not proportional, causing a sudden increase in friction, which leads to stalling. 2. Difficulties in Subject 3 test: Mismatch between speed and gear, deviation in straight-line driving, and parking more than 30cm away from the curb.
9
1
Share

How to Turn Off the Auto Start-Stop Function on the Buick Envision

The auto start-stop button for the Buick Envision is located on the right side of the center console screen. When the light is on, the auto start-stop function is enabled; pressing the button to turn off the light will disable the auto start-stop function. Additional information about the Buick Envision is as follows: 1. How the Buick Envision's engine start-stop system works: When the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts into neutral. At this point, the Start/Stop system automatically checks: the engine is idling and not in gear; the system's wheel speed sensor shows zero; the electronic battery sensor indicates sufficient energy for the next start. Once these three conditions are met, the engine automatically stops. When the driver shifts into gear and presses the accelerator, the engine restarts and continues to operate. 2. Car idling: The auto start-stop technology is primarily used in traffic congestion situations, where the engine is usually warm, and the fuel consumption of a warm engine starting is minimal. The engine can typically start at 350 rpm, which is nearly half the idle speed. Assuming there are no other loads besides the engine's internal resistance during the start-up process and the necessary equipment such as the transmission's loss, the fuel consumption is certainly less than during idle conditions.
6
0
Share

What is the purpose of capturing photos in Subject 2?

During practice for Subject 2, it is mandatory to capture a photo. This photo must be uploaded to the vehicle management department's backend system as one of the evidences for practice sessions, and it is also used to check for any violations during the practice. Without this captured photo, the practice hours might be deemed invalid during the review process due to the lack of photographic evidence. Related information: 1. Photo capture rules: The photo must clearly identify facial information, show the seatbelt being worn, and ensure that hands are not improperly placed on the steering wheel. 2. Attendance rules: The driving school issues an attendance card to each student to record the check-in time.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.