How to Remove the Cabin Air Filter in a Honda CR-V?
4 Answers
Here are two methods for removing the cabin air filter in a Honda CR-V: 1. Steps for removing the interior cabin air filter: ① The fixing device is usually located under the glove compartment cover, which can be seen by opening the glove box; ② After removing the fixing device, the cover can be easily taken off; ③ At this point, you will see a cover protecting the cabin air filter, press the clips to remove the cover; ④ The cabin air filter will be revealed, pinch one end of the filter and gently pull it out. 2. Steps for removing the exterior cabin air filter: ① First, carefully remove the waterproof rubber strip along the groove, then pay attention to the clips and remove them to successfully take off the plastic cover. ② At this point, you can directly see the external cabin air filter, simply remove the old filter.
As a DIY car owner who frequently works on my own vehicle, removing the Honda CRV's cabin air filter is actually quite simple. First, locate the glove compartment on the passenger side and gently open it. Then, press the clips on both sides to release the glove box (some model years may require unscrewing). After removing the glove box, you'll see a rectangular filter cover—simply pull it out with your fingers. Next, extract the old cabin air filter, being careful not to let dust scatter. When installing the new filter, the key is to align the airflow direction arrow, which should point toward the interior of the cabin. Finally, reinstall the cover and glove box as they were. I recommend replacing the filter every 10,000 kilometers to improve cabin air quality, prevent odors, and save on repair shop costs. The entire process takes just about ten minutes, and the tools needed are basically your hands and a flashlight. Remember to work in a well-lit area and avoid breaking the clips, as that could cause trouble.
I'm the kind of person who enjoys DIY exploration. The first time I tried removing the CRV's cabin air filter, I was a bit nervous, but succeeded on my first attempt. The key steps are: sit in the passenger seat and pull the handle to open the glove box. There are usually plastic stoppers inside the glove box—just push them inward with your fingers to release and remove them. After that, the filter cover will be exposed; slide it open to directly take out the dirty filter. When installing the new one, make sure the arrow on the filter points toward the interior of the car—I forgot this step initially, which resulted in poor filtration. The whole process is easy and time-saving, taking about 15 minutes. Generally, it should be replaced every 10,000 kilometers to prevent dust from blowing out of the AC and affecting health. I've also found that regularly changing the filter can extend the AC's lifespan and reduce repair costs. Don’t be afraid to get your hands dirty—buy an inexpensive filter and replace it yourself; it’s both fun and cost-effective.
As a practical car owner, I find removing the CRV's cabin air filter quite convenient. Start by opening the glove box and removing the internal stopper clips. Then locate and remove the filter cover to pull out the old filter for disposal. When installing the new filter, pay attention to the arrow direction—it should point toward the driver's seat. Finally, reassemble the glove box. The whole process takes just five minutes and significantly improves cabin air quality. I often remind friends to check it every six months, as accumulated dust can trigger allergies. This simple maintenance saves both money and hassle.
