How to Remove the Buzzer of Wuling Hongguang Mini?
3 Answers
The following are the steps to remove the buzzer of Wuling Hongguang Mini: 1. First, turn off the power of the electric vehicle. 2. Unscrew the screws around the seat cushion and remove the seat cushion to expose the battery and internal wiring. 3. Then pull out the wiring, locate the buzzer (usually a round black device), and follow the buzzer's wiring to find the connector. 4. Wrap the connector with insulating tape to prevent electric leakage. After separation, the alarm can be turned off. The buzzer serves a warning function and is an integrated electronic sound device powered by DC voltage.
I once removed the buzzer from my Wuling Hongguang Mini by myself because the reverse sound was too shrill and uncomfortable to drive with. After parking, first disconnect the negative terminal of the battery to prevent short circuits or electric shocks. Then, use a screwdriver to slowly remove the center console panel—the buzzer is usually hidden near the lower left side of the dashboard or around the glove box. Once you find it, simply unplug the small connector; it's not complicated. However, I must remind you that removing it means no reverse warning sound, which could lead to accidents, especially in parking lots or crowded areas. After removing it, driving in the city was fine for me, but I always reconnected it before hitting the highway to avoid potential hazards. Just use a screwdriver and a plastic pry tool to avoid scratching the interior. During routine checks, I also clean the wiring connectors to prevent oxidation or looseness. In short, the process is simple, but safety comes first. Don’t risk illegal modifications just to eliminate noise. Always pay attention to the lifespan of electrical components.
Removing the buzzer yourself is a fun DIY project. Prepare a Phillips screwdriver and insulating tape. Locate the buzzer in the Wuling Hongguang Mini, typically under the dashboard or near the steering wheel area. First, disconnect the battery, then carefully pry open the interior panel clips without damaging the plastic parts. After locating the buzzer, check the connector and remove it steadily, wrapping the wire ends to prevent accidents. If you just want to mute it, replacing it with a dedicated adapter is safer and complies with regulations. During removal, watch out for aging wires, as older cars might have cracks. DIY saves labor costs, but avoid modifying other circuits to prevent malfunctions. While it's enjoyable, don't forget safety regulations. Regular maintenance of the electrical parts can be quite rewarding.
