How to Remove the Brake Disc of the Santa Fe?
2 Answers
The method to remove the brake disc of the Santa Fe is: 1. Lift the car and remove the tire; 2. Unscrew the bolts of the brake caliper, lift the brake caliper, and take out the brake pads. The brake disc is a round disc that rotates when the car moves. The brake caliper clamps the brake disc to generate braking force. The Santa Fe's body dimensions are: length 4930mm, width 1910mm, height 1720mm, with a wheelbase of 2865mm. The Santa Fe is equipped with a 2.0T turbocharged engine, with a maximum power of 169kW, maximum power speed of 6000rpm, and maximum torque of 353Nm.
To remove the Santa Fe's brake discs, first ensure the vehicle is safely parked, engage the handbrake, and lift the car with a jack before securing it on stands. Remember to remove the wheels and loosen the caliper mounting bolts. If the caliper is still hanging, suspend it with something to avoid damaging the brake hose. Then, check if there are any retaining screws or pins on the brake disc and unscrew them with a properly sized wrench. At this point, you can try pulling the brake disc outward. If it's stuck due to rust, gently tap it with a rubber mallet to loosen it. Throughout the process, avoid using excessive force to prevent damaging components. After doing this a few times, I've found that cleaning off surrounding dust and rust is crucial as it ensures a better fit for the new disc. After removal, also check if the caliper guide pins move smoothly. Don’t just focus on replacing the disc—overlook the overall health of the braking system, as it's key to driving safety.
