How to Remove the Armrest Box Cover of Tiggo 3?
3 Answers
To remove the armrest box cover of Tiggo 3, follow these steps: Open the central armrest box and lift the fabric cover inside; Use a tool to remove the two screws and keep them safely; Shift the gear to N position, then hold the gear lever and pull it upwards to release the fixing buckle; Use a pry tool to pry open the joint between the storage box panel and the armrest box, starting with the left side and then the right side. After prying both ends, lift it upwards to release the buckles; There are buckles all around the central panel, lift them one by one; There is also a plug under the panel, disconnect it to complete the process.
Removing the Tiggo 3 armrest cover is actually quite simple. I often do these small adjustments myself—it's secured by plastic clips and requires no tools. Sit in the driver's seat, reach behind the rear edge of the armrest cover, and gently push or lift upward. If it feels a bit tight, you can use a plastic card to help pry the edge, but be gentle to avoid scratching the interior. Don’t force it too hard at once to prevent the clips from breaking. Once the cover is off, you can clean out dust inside or check for any obstructions. I recommend turning off everything in the car before removal to avoid accidentally pressing buttons. When reinstalling, just align the clips and press to snap it back into place—it’s very straightforward. Remember to clean it regularly to extend its lifespan, especially since dust buildup can cause squeaks. This is very helpful for daily owner maintenance, keeping the cabin clean and comfortable.
I've removed the armrest lid of my Tiggo 3 several times myself, and the method is quite simple—no professional tools needed. Just use your hands to pull upward firmly along the rear edge of the lid, as it's designed with a snap-fit structure that releases with a single pull. Be careful not to yank from the sides, as this could damage the plastic components. On my first attempt, I made the mistake of rushing and applying uneven force, which resulted in a minor scratch. Later, I learned to take it slow. Cleaning the accumulated dirt inside the lid after removal is easy, and reassembly is just a matter of pressing it back into place until you hear a 'click.' I recommend doing this in an open area to avoid dropping small parts inside the car where they might get lost. This little trick can save you some repair costs by doing it yourself, and keeping the interior clean makes for a more pleasant driving experience.
